
Headphones prototype pcb
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
Analog Devices
Low Voltage, 400 MHz, Quad 2:1 Mux with 3ns Switching Time
The ADG774ABRQ is an uncategorised made by Analog Devices in a SSOP16 package with 16 pins. Low Voltage, 400 MHz, Quad 2:1 Mux with 3ns Switching Time.
PCBKit's library has its KiCad symbol (Analog & Interface:ADG774, from CERN's library) and its footprint (Package_SO:SSOP-16_5.3x6.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | IN | Input |
| 2 | S1A | Input/output |
| 3 | S1B | Input/output |
| 4 | D1 | Input/output |
| 5 | S2A | Input/output |
| 6 | S2B | Input/output |
| 7 | D2 | Input/output |
| 8 | GND | Power in |
| 9 | D3 | Input/output |
| 10 | S3B | Input/output |
| 11 | S3A | Input/output |
| 12 | D4 | Input/output |
| 13 | S4B | Input/output |
| 14 | S4A | Input/output |
| 15 | EN | Input |
| 16 | VDD | Power in |

strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
Yes. The symbol is Analog & Interface:ADG774 and the footprint Package_SO:SSOP-16_5.3x6.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SSOP16, with 16 pins. Its footprint is drawn on this page.
Parts like it in the library: the MOLI3004BABN by MOLI, the LTC2600CGN by Analog Devices, the AD5570ARS by Analog Devices and the ADCMP551BRQ by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.