
Cubesat obc
ephemeridis/cubesat_obc
A small CubeSat On-Board Computer with lots of processing headroom, utilizing a low power ARM Cortex M33 processor at its core.
Analog Devices
Differential 8-Channel CMOS Analog Multiplexers
The ADG1607BCP is an uncategorised made by Analog Devices in a QFN32 package with 33 pins. Differential 8-Channel CMOS Analog Multiplexers.
PCBKit's library has its KiCad symbol (Analog_Switch:ADG1607xCP, from KiCad's library) and its footprint (Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm, from KiCad's library), ready for a KiCad board. 3 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | S8B | Input/output |
| 2 | S7B | Input/output |
| 3 | S6B | Input/output |
| 4 | S5B | Input/output |
| 5 | S4B | Input/output |
| 6 | S3B | Input/output |
| 7 | S2B | Input/output |
| 8 | S1B | Input/output |
| 9 | GND | Power in |
| 10 | A2 | Input |
| 11 | NC | Not connected |
| 12 | NC | Not connected |
| 13 | NC | Not connected |
| 14 | A1 | Input |
| 15 | A0 | Input |
| 16 | EN | Input |
| 17 | S1A | Input/output |
| 18 | S2A | Input/output |
| 19 | S3A | Input/output |
| 20 | S4A | Input/output |
| 21 | S5A | Input/output |
| 22 | S6A | Input/output |
| 23 | S7A | Input/output |
| 24 | S8A | Input/output |
| 25 | VSS | Power in |
| 26 | NC | Not connected |
| 27 | DA | Input/output |
| 28 | NC | Not connected |
| 29 | VDD | Power in |
| 30 | NC | Not connected |
| 31 | DB | Input/output |
| 32 | NC | Not connected |
| 33 | VSS | Passive |

ephemeridis/cubesat_obc
A small CubeSat On-Board Computer with lots of processing headroom, utilizing a low power ARM Cortex M33 processor at its core.

etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.

etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
Yes. The symbol is Analog_Switch:ADG1607xCP and the footprint Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN32, with 33 pins. Its footprint is drawn on this page.
Parts like it in the library: the AD9513BCP by Analog Devices, the AD9514BCP by Analog Devices, the FM15L023UK6 by FUDAN MICRO and the CV520 by NXP Semiconductors. Check their datasheets: a part that fits the footprint may still differ in its ratings.
3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.