
Integrated
KarpelesLab/ledger_implant_detector
A small hand-held tool for spotting extra conductive structures hidden inside the plastic shell of a hardware wallet (e.g. a Ledger).
Analog DevicesExtended
-40℃~+85℃ 270fs 3V~3.6V 4400MHz External、Built-in Support Three-Wire Interface LFCSP-32(5x5) Clock Generators, PLLs, Frequency Synthesizers ROHS
The ADF4351BCPZ is a clock Generators, PLLs, Frequency Synthesizer made by Analog Devices in a LFCSP-32(5x5) package with 33 pins. -40℃~+85℃ 270fs 3V~3.6V 4400MHz External、Built-in Support Three-Wire Interface LFCSP-32(5x5) Clock Generators, PLLs, Frequency Synthesizers ROHS.
PCBKit's library has its KiCad symbol (Timer_PLL:ADF4351, from KiCad's library) and its footprint (Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm, from KiCad's library), ready for a KiCad board. 137 are in stock at JLCPCB (part C654681). 2 open-source boards in 2 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | CLK | Input |
| 2 | DATA | Input |
| 3 | LE | Input |
| 4 | CE | Input |
| 5 | SW | Input |
| 6 | Vp | Power in |
| 7 | CPout | Input |
| 8 | CPGND | Power in |
| 9 | AGND | Power in |
| 10 | AVDD | Power in |
| 11 | AGNDVCO | Power in |
| 12 | RF_OUT_A+ | Output |
| 13 | RF_OUT_A- | Output |
| 14 | RF_OUT_B+ | Output |
| 15 | RF_OUT_B- | Output |
| 16 | VVCO | Power in |
| 17 | VVCO | Power in |
| 18 | AGNDVCO | Power in |
| 19 | TEMP | Input |
| 20 | VTUNE | Input |
| 21 | AGNDVCO | Power in |
| 22 | RSET | Input |
| 23 | VCOM | Input |
| 24 | VREF | Input |
| 25 | LD | Input |
| 26 | PDB_RF | Input |
| 27 | DGND | Power in |
| 28 | DVDD | Power in |
| 29 | REFIN | Input |
| 30 | MUXOUT | Output |
| 31 | SDGND | Power in |
| 32 | SDVDD | Power in |
| 33 | EP | Power in |

KarpelesLab/ledger_implant_detector
A small hand-held tool for spotting extra conductive structures hidden inside the plastic shell of a hardware wallet (e.g. a Ledger).

VABISMO/QSSC
Quantum Solid State Chip - NV DIAMOND . Spin Defect Simulator and hardware controller with Qiskit backend (WIP)
Yes. The symbol is Timer_PLL:ADF4351 and the footprint Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LFCSP-32(5x5), with 33 pins. Its footprint is drawn on this page.
Analog Devices publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C654681, with 137 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ADF4351BCPZ-RL7 by Analog Devices, the ADF4350BCPZ-RL7 by Analog Devices, the ADF4350BCPZ by Analog Devices and the ADF4350BCPZ-RL by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.