
Try
Ahmed-YSY/FleetGuard
IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW.

PCB that acts as Personal Badge to share as memories at HC Fallout
Badge is an open-source printed circuit board by zzertexx, from the zzertexx/PCB_Badge repository on GitHub. It is a 2-layer board of 100 × 100 mm with 9 parts on 22 nets, routed with 84 tracks and 7 vias.
It is built around the ESP32-C3-DEVKITM-1. Its parts include 3 resistors, 3 diodes and 1 IC. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
It is a simple PCB Badge to share with other people as a memory
LEDs will simulate flashing lights of actual plane and buzzing will happen with specific action
| Name | Price per 10 quantity | Overall quantity |
|---|---|---|
| PCB Production | 5 USD | 10 |
| ESP32-C3-Devkit | 10 USD | 10 |
| 220 ohm Resistor | 0.3 USD | 30 |
| Buzzer | 2.5 USD | 20 |
| THT LED D5mm | 1.2 USD | 30 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1, BZ2 |
| 1 | ESP32-C3-DevKitM-1 | RF_Module:ESP32-C3-DevKitM-1 | U1 |

Ahmed-YSY/FleetGuard
IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW.

iho77/ppo_v2
This work is licensed under a [Creative Commons Attribution-NonCommercial 4.0 International License][cc-by-nc].

TiboDevC/clockclock
Personal project of a kinetic clock inspired by Humans Since 1982, using 48 stepper motors to display time in an artistic and dynamic way.

Abineshpk007/KICAD-solar_panel_monitoring_prototype
This is my PCB, there are many outer like it but this is mine

diaxxu/CNC-Router
a challenge i gave myself to make something great ! yes its a cnc milling / laser / plotter machine

saniyafatima07/Hail_Mary
Lakshya: Low Cost Precision Guidance and Smart Electronic Fuze System


VladimirVladimirovMinkov/UOA_HPA
This is a code and document repository for the University of auckland Aeronaughtics Club Human Powered Aircraft
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the ESP32-C3-DEVKITM-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zzertexx/PCB_Badge repository on GitHub, at the commit this page was made from: the board is PCB/badge.kicad_pcb and its schematic PCB/badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zzertexx before reusing the design.