

PicoSax1
Updates are occasionally posted on Instagram
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 42
- Pads
- 539
- Tracks, vias
- 208, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Feb 2022
- Updated
- 12 Aug 2026
Overview
PicoSax1 is an open-source printed circuit board by zygurt, from the zygurt/MIDI-Wind-Controller repository on GitHub, published under the MIT licence. It is a 2-layer board with 36 parts on 42 nets, routed with 208 tracks and 3 vias.
Its parts include 16 resistors, 14 switches, 3 connectors and 2 ICs. It belongs with the RP2040 boards of this library.
README
README.mdMIDI-Wind-Controller
A brief overview of the repo
- 3D designs contains dxf and svg files. Basic design was done in Fusion 360 and then exported.
- Datasheets contains datasheets. Woah.
- src contains source code for doppler and Arduino Leonardo implementations, as well as the board schematic. Currently midi messages are sent over USB, and shows the midi note number in binary on the LED grid on the doppler board.
Known issues
- Pressing the low C key (D9) causes the doppler to crash. Reducing the length of the readButtons() switch case to 7 statements stops the crashing. The error isn't present on the Arduino Leonardo.
- The octave keys give incorrect values for C#. Top 2 octaves are swapped. Again, this error does not occur for the Arduino Leonardo.
Updates are occasionally posted on Instagram
Current prototype status:

Legacy information
Videos about the initial prototype can be found on Youtube
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 14 | Omron_B3K_L13L | MyLibrary:Omron B3K L13L | SW1, SW2, SW3, SW4, SWA1, SWB1, SWBb1, SWC1, SWD1, SWE1, SWEb1, SWF1, SWG1, SWGs1 |
| 2 | ~ | MyLibrary:PiPico Header | J1, J2 |
| 1 | 10R 0.25W | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 33R 0.5W | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | ~ | MyLibrary:Perfboard 13x24 | U2 |
| 1 | ~ | MyLibrary:BPS110 AD0P15 | U1 |
| 1 | ~ | MyLibrary:MIDI_DIN5 | J3 |
More from zygurt/MIDI-Wind-Controller
4- 2 layers100 × 160 mm

- 2 layers100 × 160 mm

- 2 layers100 × 160 mm

PicoSax v2 NoLEDS
zygurt/MIDI-Wind-Controller
Updates are occasionally posted on Instagram
38 parts1MIT - 2 layers35.7 × 59.5 mm

Similar boards
- 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
36 parts1kGPL-3.0 - 2 layers55 × 70 mm

Arduino v1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
36 parts915 - 2 layers50.4 × 24.8 mm

- 2 layers45.7 × 31.8 mm

LEDx16 board
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
36 parts803MIT - 2 layers32 × 24 mm

- 2 layers69 × 53.8 mm

TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
36 parts530 - 2 layers99.1 × 53.3 mm

- 2 layers16.1 × 119 mm

Questions
What parts does the PicoSax1 use?
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PicoSax1 KiCad files?
From the zygurt/MIDI-Wind-Controller repository on GitHub, at the commit this page was made from: the board is pcb/PicoSax/Backup/PicoSax1.kicad_pcb and its schematic pcb/PicoLEDs/PicoLEDs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PicoSax1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).