

Rtc sd
Scalable OS for 6502/65816
- Size
- 53.3 × 130.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 54
- Pads
- 230
- Tracks, vias
- 753, 52
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2015
- Updated
- 26 May 2025
Overview
Rtc sd is an open-source printed circuit board by zuiko21, from the zuiko21/minimOS repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.3 × 130.8 mm with 39 parts on 54 nets, routed with 753 tracks and 52 vias.
It is built around the 74HC245D, 74HC132D and 74HC138, with the 74HC165D, 74HC174D and 74HC595 among its other parts. Its parts include 9 resistors, 7 diodes, 7 connectors, 6 ICs and 4 capacitors.
Main components
774HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC132D
SO-14-40℃~+125℃ 1.5V~4.2V 2 21ns@6V,50pF 2V~6V 2uA 3.7V~4.5V、5.2V~6V 300mV~1.2V 4 400mV 5.2mA 5.2mA 74HC Series NAND Gate Schmitt trigger SOIC-14 Logic Gates ROHSNexperiaSpecialty Logic74HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, Decoders74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers74HC174D
SOIC-16-40℃~+125℃ 1 107MHz 28ns@6V,50pF 2V~6V 3.5pF 5.2mA 5.2mA 6 74HC Series 8uA D-Type Reset Rising Edge SOIC-16 Flip Flops ROHSNexperiaFlip Flops74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersBAT85
DO-341 Independent 200mA 2uA@25V 30V 5A 800mV@100mA DO-34 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdThis project is under the MIT License, see LICENSE for details.
minimOS
Please note that this doc is OBSOLETE. Read about updated details in the new architecture.md file.
Minimalistic, portable, scalable Operating System for everything from embedded devices to (quasi) full-featured desktop computers!
Purpose
Currently in a VERY early development stage, hopefully will become a common reference platform for deployment of computer-related appliances -- think about embedded systems, like the original intent: an Actual Exposure Time Meter for classic photographic cameras. But by virtue of its modularity and scalability would equally serve to a whole breed of home-made, retro-inspided computers.
Future ports
Initial target is the venerable 65(C)02 and its big brother, the 16-bit enabled 65816 (port known as minimos·16) which will keep compatibility with existing '02 code. But other ports to many CPU architectures are in mind, like the Motorola 68xx / Hitachi 63xx series (minimOS·63, with the interesting 6809/6309 branch as minimOS·69), 680x0 (minimOS·68), 8080/8085/Z80 (minimOS·80), even (God forbid! :-) the commonly used x86 (minimOS·86). I really have little-to-no knowledge about this CPU family, nor about the usual IBM-based PC architecture; hopefully someone will be able to port minimOS without too much of a chore, that would give a very interesting 'breath' to (otherwise useless) older PCs.
Supported architectures
This section has been moved to the hardware section
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 3K3 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3, R5, R6, R7, R8, R9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 4148 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D1, D2, D3 |
| 3 | 68p | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3, C4 |
| 2 | BAT85 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D4, D5 |
| 1 | 1K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 22n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 6K8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | 74HC132 | Package_DIP:DIP-14_W7.62mm_Socket | U5 |
| 1 | 74HC138 | Package_DIP:DIP-16_W7.62mm_Socket | U1 |
| 1 | 74HC165 | Package_DIP:DIP-16_W7.62mm_Socket | U3 |
| 1 | 74HC174 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | 74HC245 | Package_DIP:DIP-20_W7.62mm_Socket | U6 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm_Socket | U4 |
| 1 | EXPANSION | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Horizontal | J7 |
| 1 | Logo_Open_Hardware_Small | durango:j300 | LOGO1 |
| 1 | RTC | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | SD0 | LED_THT:LED_D3.0mm | D6 |
| 1 | SD0 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | SD1 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | SD1 | LED_THT:LED_D3.0mm | D7 |
| 1 | SIDECAR | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Horizontal | J1 |
| 1 | SPI2 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | SPI3 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
More from zuiko21/minimOS
12- 2 layers177.8 × 130.8 mm

- 2 layers177.8 × 130.8 mm

- 2 layers250.8 × 130.2 mm

- 2 layers351.8 × 144.1 mm

- 2 layers

- 2 layers177.8 × 130.8 mm

- 2 layers

- 2 layers99.7 × 63.5 mm

- 2 layers

- 2 layers97.8 × 72.4 mm

- 2 layers97.8 × 72.4 mm

- 2 layers80 × 63.5 mm

Similar boards
- 2 layers369.6 × 127.6 mm
/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
- 2 layers208 × 110 mm

- 2 layers284.9 × 96.5 mm

- 4 layers188 × 128.3 mm

- 2 layers196.9 × 125.1 mm
/Revision%201.5%20(Expanded)/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
8-Bit CPU 32k
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
106 parts184 - 2 layers219 × 88 mm

- 2 layers41.9 × 87.6 mm

- 2 layers301 × 262.6 mm

1 Sistema FINAL
felipesantiagoach-ops/cdp1802-8bit-computer
8-bit microcomputer based on the RCA CDP1802, the first CMOS microprocessor. Three stages designed in KiCad: two built and tested (assembly programs, UART, Tiny BASIC, Elf/OS) and a final design with an ADC, I²C/SPI…
207 parts
Questions
How big is the Rtc sd PCB?
It measures 53.3 × 130.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rtc sd use?
39 parts, built around the 74HC245D, 74HC132D, 74HC138 and 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rtc sd KiCad files?
From the zuiko21/minimOS repository on GitHub, at the commit this page was made from: the board is hard/kicad/rtc-sd/rtc-sd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rtc sd design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).