

Test board
PCB for testing high-speed RSFQ digital circuits
- Size
- 100.9 × 88 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 178
- Nets
- 103
- Pads
- 522
- Tracks, vias
- 1,429, 3,988
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Dec 2025
- Updated
- 9 Jan 2026
Overview
Test board is an open-source printed circuit board by ZoomingGuy2, from the ZoomingGuy2/RSFQ-test-board repository on GitHub. It is a 4-layer board of 100.9 × 88 mm with 178 parts on 103 nets, routed with 1,429 tracks and 3,988 vias.
It is built around the HC-PM254-8.5H-1X24PZ, TLV75733PDBVR-MS and BWSMA-KE-Z001, with the CJS-1201B among its other parts. Its parts include 80 resistors, 47 capacitors, 15 ICs, 1 connector and 1 switch.
Main components
4HC-PM254-8.5H-1X24PZ
插件,P=2.54mmFemale HeadersHong ChengTLV75733PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedBWSMA-KE-Z001
插件-65℃~+165℃ 1 50Ω 6.2mm 6GHz Board Side Inner hole Positive Pin SMA 插件 Coaxial Connectors (RF) ROHSBAT WIRELESSCoaxial Connectors (RF)CJS-1201B
SMD1 Black SPDT Slide, Recessed SMD DIP Switches ROHSNidecDIP Switches
README
README.mdDigital RSFQ Test PCB
Specs
- PCB designedi for I/O speeds up to 200 MHz
- 10 inputs, 20 outputs
- Compatible with CMOD A7-35T FPGA board
- 512KB SRAM
- 4MB Quad-SPI Flash
- 20,800 LUT
- 41,600 FF
- 225 KB BRAM
- 4.3W max power consumption
Parts
178| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | BWSMA-KE-Z001 | easyeda2kicad:SMA-TH_BWSMA-KE-Z001 | RF1, RF2, RF10, RF11, RF12, RF13, RF14, RF15, RF16, RF17, RF18, RF19, RF20, RF21, RF22, RF23 +14 |
| 20 | 3.3kΩ | PCM_JLCPCB:R_0402 | R1, R3, R11, R13, R15, R17, R19, R21, R23, R25, R27, R29, R31, R33, R35, R37 +4 |
| 20 | 51Ω | PCM_JLCPCB:R_0402 | R2, R10, R12, R14, R16, R18, R20, R22, R24, R26, R28, R30, R32, R34, R36, R38 +4 |
| 10 | 0Ω | PCM_JLCPCB:R_0402 | R71, R72, R73, R74, R75, R76, R77, R78, R79, R80 |
| 10 | 100nF | PCM_JLCPCB:C_0603 | C33, C34, C35, C36, C37, C38, C39, C40, C41, C42 |
| 10 | 100pF | PCM_JLCPCB:C_0402 | C11, C13, C15, C16, C17, C18, C19, C20, C21, C22 |
| 10 | 10nF | PCM_JLCPCB:C_0402 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 10 | 1uF | PCM_JLCPCB:C_0402 | C23, C24, C25, C26, C27, C28, C29, C30, C31, C32 |
| 10 | 3.3kΩ | PCM_JLCPCB:R_0603 | R43, R44, R46, R48, R50, R52, R54, R56, R58, R60 |
| 10 | 49.9Ω | PCM_JLCPCB:R_0402 | R41, R42, R45, R47, R49, R51, R53, R55, R57, R59 |
| 10 | 82Ω | PCM_JLCPCB:R_0603 | R61, R62, R63, R64, R65, R66, R67, R68, R69, R70 |
| 10 | TLV3601DCKR | easyeda2kicad:SC-70-5_L2.0-W1.3-P0.65-LS2.1-BR | U1, U3, U5, U6, U7, U8, U9, U10, U11, U12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.5mm_Pad | H1, H2, H3, H4 |
| 2 | 10uF | PCM_JLCPCB:C_0805 | C14, C47 |
| 2 | 1uF | PCM_JLCPCB:C_0603 | C43, C44 |
| 2 | 220nF | PCM_JLCPCB:C_0603 | C45, C46 |
| 2 | HC-PM254-8.5H-1X24PZ | easyeda2kicad:HDR-TH_24P-P2.54-V-F | U2, U13 |
| 1 | 2.2uF | PCM_JLCPCB:C_0603 | C12 |
| 1 | CJS-1201B | easyeda2kicad:SW-SMD_CJS-1201B | SW1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | REF3012 | Package_TO_SOT_SMD:SOT-23 | U14 |
| 1 | REF3025 | Package_TO_SOT_SMD:SOT-23 | U15 |
| 1 | TLV75733PDBVR | easyeda2kicad:SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BL | U16 |
Similar boards
- 2 layers102.7 × 40 mm

- 6 layers90 × 89 mm

Modular processing board
igorwolfs/modular-processing-hw
MCU Breakout board with Hirose BM28B connector
177 parts1 - 2 layers207 × 42 mm

Antenna test
dani9875/rfid_antenna_test
Things to write about: - purpose of antenna matching - documents and know how utilised - mistakes made in connection with parameters - measuring antenna parameters with VNA - resolution problem - tuning
40 partsApache-2.0 - 4 layers100 × 100 mm

Phmod
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
234 parts - 2 layers200 × 150 mm

- 4 layers80 × 30 mm

Voisin
ciborg971/KISSE-1
A homebuilt aicraft made with the same philosophy as the linux kernel ... and electric
44 parts1MIT - 4 layers50 × 50 mm

- 4 layers180 × 100 mm

Front panel
TIGP-Experimental-Methods/class-board-2026
TIGP class instrument 2026: one board, five blocks - KiCad hardware, ESP32-S3 firmware, phone PWA, Python API, workbook
76 parts
Questions
How big is the Test board PCB?
It measures 100.9 × 88 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Test board use?
178 parts, built around the HC-PM254-8.5H-1X24PZ, TLV75733PDBVR-MS, BWSMA-KE-Z001 and CJS-1201B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Test board KiCad files?
From the ZoomingGuy2/RSFQ-test-board repository on GitHub, at the commit this page was made from: the board is test_board/test_board.kicad_pcb and its schematic test_board/comparator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Test board design in my own project?
Its repository states no licence, so its author keeps all rights: ask ZoomingGuy2 before reusing the design.