

WaterSensorV1
- Size
- 33.9 × 43.5 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 45
- Nets
- 43
- Pads
- 159
- Tracks, vias
- 392, 99
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Feb 2026
- Updated
- 7 Nov 2026
Overview
WaterSensorV1 is an open-source printed circuit board by zOnlyKroks, from the zOnlyKroks/pcb-consortium repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 33.9 × 43.5 mm with 45 parts on 43 nets, routed with 392 tracks and 99 vias.
It is built around the ESP32-C6-WROOM-1-N4, RT9080-33GJ5 and SI2301CDS, with the AO3400A among its other parts. Its parts include 17 resistors, 9 capacitors, 4 transistors, 4 connectors and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-C6-WROOM-1-N4
SMD-28P-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 Chip On-board PCB Antenna UART、SPI、I2C、I2S SMD-28P WiFi Modules ROHSEspressif SystemsWiFi ModulesRT9080-33GJ5
TSOT-23-5-40℃~+125℃@(Tj) 1 2uA 3.3V 360mV@(600mA) 42uVrms 5.5V 600mA 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRichtek TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSI2301CDS
SOT-23-55℃~+150℃ 1 P-Channel 142mΩ@2.5V 20V 3A 400mV 400mW 500pF 6.6nC@4.5V 80pF SOT-23 MOSFETs ROHSFUXINSEMIMOSFETsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdPCB / Circuit Designs
Support & Issues
If something is broken, unclear, or you need help assembling:
- Open a GitHub Issue
- I’ll try to help when I can
Use at your own risk 🙂
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R6, R9, R10, R14, R16 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C8, C9 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R15, R17 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | SI2301CDS | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | RED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BOOT | WaterSensorV1:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW2 |
| 1 | ESP32-C6-WROOM-1-N4 | WaterSensorV1:ESP32-C6-WROOM-1 | U4 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | LiPo 1S | WaterSensorV1:CONN-TH_2P-P2.00_BX-PH2.0-2PWZ | J2 |
| 1 | RESET | WaterSensorV1:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW1 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SOIL PROBE | WaterSensorV1:CONN-TH_3P-P2.00_BX-PH2.0-3PWZ | J3 |
| 1 | TP4054-42 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | UART | WaterSensorV1:CONN-TH_2P-P2.00_BX-PH2.0-2PWZ | J4 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USER | WaterSensorV1:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW3 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
More from zOnlyKroks/pcb-consortium
12- 4 layers66 × 155 mm

- 2 layers117.1 × 40.9 mm

- 4 layers165 × 125 mm

- 4 layers170 × 90 mm

- 4 layers191 × 130 mm

- 4 layers230 × 77.6 mm

- 6 layers100 × 100 mm

- 4 layers126.3 × 115.4 mm

- 4 layers64.5 × 74.8 mm

- 4 layers128 × 60 mm

- 2 layers112 × 68 mm

- 2 layers80 × 40.3 mm

Similar boards
- 4 layers77.9 × 45.2 mm

S3-silicon Sharp Touch
martinberlin/Sharp-LV
This KiCad board aims to be a low consumption driver for SHARP LCDs w/optional touch. MCU: Nordic RF52 (not tested) | ESP32S3 buy one in Tindie before sending to production
66 parts1MIT - 2 layers100 × 100 mm

PowerSubmodule
SarahTallack/Power_Submodule
Power submodule design for perch scale design project. Custom power supply PCB.
59 parts - 4 layers21.7 × 89.8 mm

- 2 layers105.2 × 107 mm

- 2 layers75.2 × 76.5 mm

- 2 layers60 × 121.3 mm

- 4 layers94.5 × 99.8 mm

ValveController
afewyards/HydroMix
A mains-powered, Zigbee-connected controller for a hydronic 3-way mixing valve — it regulates the supply-water temperature of a floor heating/cooling system and keeps regulating autonomously if the Zigbee link goes down.
123 partsMIT - 2 layers108 × 75 mm

ESP32 C3 Zigbee Temp
Cath272/ESP32-Low-Power-Temp-Monitor
In the project files you may find ESP32-C3 instead of ESP32-C6. I named it wrong when i created the project. The issue is just the file names, the footprints are correct and use a C6.
75 partsGPL-3.0
Questions
How big is the WaterSensorV1 PCB?
It measures 33.9 × 43.5 mm and has 2 copper layers, 1.58 mm thick.
What parts does the WaterSensorV1 use?
45 parts, built around the ESP32-C6-WROOM-1-N4, RT9080-33GJ5, SI2301CDS and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WaterSensorV1 KiCad files?
From the zOnlyKroks/pcb-consortium repository on GitHub, at the commit this page was made from: the board is Sensor/WaterSensorV1/WaterSensorV1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WaterSensorV1 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).