zomble/pid-controller-kicadPid controller copy is an open-source printed circuit board by zomble, from the zomble/pid-controller-kicad repository on GitHub. It is a 2-layer board of 88.9 × 45.7 mm with 29 parts on 24 nets, routed with 112 tracks and 10 vias.
It is built around the HLK-PM03. Its parts include 9 resistors, 4 capacitors, 1 diode and 1 switch. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 200Ω | Resistors_SMD:R_0805_HandSoldering | R4, R5, R6 |
| 2 | 12KΩ | Resistors_SMD:R_0805_HandSoldering | R8, R9 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 100uF | Capacitors_SMD:CP_Elec_8x10.5 | C1 |
| 1 | 10kΩ | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 1W_TEMP | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | PSENSOR1 |
| 1 | 1kΩ | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | 250mA | Diodes_SMD:D_SMB-SMC_Universal_Handsoldering | FUSE1 |
| 1 | 3v | Diodes_SMD:D_SMB-SMC_Universal_Handsoldering | DZ1 |
| 1 | 4.7kΩ | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 470nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 720Ω | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | AC_A | Measurement_Points:Measurement_Point_Round-TH_Big | AC2 |
| 1 | AC_E | Measurement_Points:Measurement_Point_Square-TH_Big | AC3 |
| 1 | AC_P | Measurement_Points:Measurement_Point_Round-TH_Big | AC1 |
| 1 | CAP | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | D | Diodes_SMD:D_SMB-SMC_Universal_Handsoldering | D1 |
| 1 | ESP-12 | ESP8266:ESP-12 | ESP1 |
| 1 | FLASH | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | SW1 |
| 1 | GPIO | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | GPIO1 |
| 1 | HLK-PM03 | Power_Supply:HLK-PM03 | PWR1 |
| 1 | SERIAL | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | PSERIAL1 |
| 1 | SSR | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | PRELAY1 |
| 1 | STATUS | LEDs:LED_WS2812-PLCC6 | RGB1 |
| 1 | USAGE | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | PUSAGE1 |
The 28 most common of 29 parts.
It measures 88.9 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the HLK-PM03. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zomble/pid-controller-kicad repository on GitHub, at the commit this page was made from: the board is pid-controller copy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zomble before reusing the design.
jibrilsharafi/EnergyMe-Home
Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)
voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.
tomikaa87/esp-thermostat
Smart WiFi thermostat based on the well-known ESP8266 SoC.
Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.
