4 layers128.1 × 87.6 mm
Thesis
MZMurad/X-band_Transmitter_Thesis_Files
This is a repo for all the files used and mentioned in my thesis
103 parts
4 layers60.3 × 49.2 mm
ZLPLL14G V4.1
zl2brg/ZLPLLZLPLL Source Code
- Size
- 60.3 × 49.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 71
- Pads
- 340
- Tracks, vias
- 801, 331
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Aug 2023
- Updated
- 27 Jun 2026
Overview
ZLPLL14G V4.1 is an open-source printed circuit board by zl2brg, from the zl2brg/ZLPLL repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 60.3 × 49.2 mm with 103 parts on 71 nets, routed with 801 tracks and 331 vias.
It is built around the ATMEGA328-PU, AVA-183A+ and ADF5355BCPZ, with the LM78M06CT, BAS40-04 and CGRM4004-G among its other parts. Its parts include 53 capacitors, 20 resistors, 7 connectors, 6 ICs and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AVA-183A+
QFN-8-EP(3x3)12.4dB 131mA 19.9dBm 5GHz~18GHz 5V 6dB Bias control circuit QFN-8-EP(3x3) RF Amplifiers ROHSMini-CircuitsRF Amplifiers
ADF5355BCPZ
LFCSP-32(5x5)-40℃~+85℃ 13600MHz 3.15V~3.45V、4.75V~5.25V External、Built-in Support Three-Wire Interface LFCSP-32(5x5) Clock Generators, PLLs, Frequency Synthesizers ROHSAnalog DevicesClock Generators, PLLs, Frequency Synthesizers
LM78M06CT
TO-220-40℃~+125℃@(Tj) 1 25V 2V@(500mA) 350mA 45uV 6V 80dB@(2400Hz) 8mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BAS40-04
SOT-23Schottky Diodeshongjiacheng
CGRM4004-G
SOD-123SOD-123 Diodes - General Purpose ROHSComchipDiodes - General Purpose
README
README.mdZLPLL
Wayne Knowles ZL2BKC ZLPLL ZLPLL-14G Code. Imported v4.2A from his avrstudio project and added open source licences along with Linux Makefile build support. v4.4A Fixed floating point precision register calculation inaccuracies by moving to 64/32bit integer math. Register calculations are based on Andy G4JNT's code. Frequency calculation now accurate to 10Hz below 6.8Ghz and 20Hz above.
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10pF | ZLPLL14G:C0402 | C26, C28, C30, C33, C37, C41, C42, C46, C49, C50 |
| 9 | 100nF | ZLPLL14G:C0402 | C22, C24, C29, C35, C38, C44, C45, C48, C51 |
| 6 | SOLDERJUMPERNO | ZLPLL14G:SJ_2S-NO | JP1, JP2, JP3, JP4, JP5, JP7 |
| 5 | 100nF | ZLPLL14G:C0603 | C4, C5, C6, C7, C23 |
| 5 | 1uF | ZLPLL14G:C0603 | C3, C14, C19, C27, C40 |
| 4 | 22uF | ZLPLL14G:C0603 | C2, C8, C10, C11 |
| 4 | 5K1 | ZLPLL14G:R0603 | R16, R19, R20, R24 |
| 3 | 1nF | ZLPLL14G:C0402 | C25, C32, C39 |
| 3 | 1nF | ZLPLL14G:C0603 | C52, C53, C56 |
| 3 | FB 150R | ZLPLL14G:R0603 | R5, R10, R11 |
| 2 | 0R | ZLPLL14G:R0603 | R7, R9 |
| 2 | 10nF | ZLPLL14G:C0603 | C43, C54 |
| 2 | 8n2 | ZLPLL14G:C0603 | L3, L4 |
| 2 | AOT | ZLPLL14G:R0603 | R22, R26 |
| 1 | ZLPLL14G:1X10 | J7 | |
| 1 | 0R | ZLPLL14G:R1206 | R8 |
| 1 | 100pF | ZLPLL14G:C0603 | C47 |
| 1 | 10K | ZLPLL14G:R0603 | R25 |
| 1 | 10pF | ZLPLL14G:C0603 | C55 |
| 1 | 10uF | ZLPLL14G:C0603 | C9 |
| 1 | 150pF | ZLPLL14G:C0603 | C16 |
| 1 | 18pF | ZLPLL14G:C0402 | C18 |
| 1 | 1K5 | ZLPLL14G:R0603 | R21 |
| 1 | 1nF+1uF | ZLPLL14G:C0402 | C31 |
| 1 | 1uF | ZLPLL14G:C0402 | C34 |
| 1 | 220R | ZLPLL14G:EXBS8V | RN1 |
| 1 | 2R49 | ZLPLL14G:R1206 | R1 |
| 1 | 360pF | ZLPLL14G:C0603 | C15 |
| 1 | 3K00 | ZLPLL14G:R0603 | R12 |
| 1 | 3n3 | ZLPLL14G:C0603 | L2 |
| 1 | 4.7uF | ZLPLL14G:CT3528 | C12 |
| 1 | 4n7 | ZLPLL14G:C0603 | C13 |
| 1 | 4u7 | ZLPLL14G:C0603 | C1 |
| 1 | 5.6pF | ZLPLL14G:C0402 | C17 |
| 1 | 50R | ZLPLL14G:R0603 | R23 |
| 1 | 51R | ZLPLL14G:R0603 | R18 |
| 1 | 5V6 | ZLPLL14G:SOD80C | D1 |
| 1 | 6K20 | ZLPLL14G:R0603 | R15 |
| 1 | 6R8 | ZLPLL14G:R1206 | R14 |
| 1 | 78L05F | ZLPLL14G:SOT89 | IC3 |
| 1 | 8-15VDC | ZLPLL14G:22-23-2021 | V0 |
| 1 | ADF5355BCPZ | ZLPLL14G:QFN50P500X500X100-33V2N | U3 |
| 1 | ATMEGA328 | ZLPLL14G:TQFP32-08 | U1 |
| 1 | AUX | ZLPLL14G:CHIPLED_0805 | LED1 |
| 1 | AVA-183A+ | ZLPLL14G:DQ849 | U2 |
| 1 | BAS40-04 | ZLPLL14G:SOT23 | D3 |
| 1 | CGRM4004-G | ZLPLL14G:SOD-123_MINI-SMA | D2 |
| 1 | CON_HEADER_1X05-PTH | ZLPLL14G:M1X5 | J4 |
| 1 | CON_HEADER_2X04-PTH | ZLPLL14G:M2X4 | J1 |
| 1 | CON_HEADER_PRG_AVR_ICSP-PTH | ZLPLL14G:HEADER_PRG_2X03 | J5 |
| 1 | HMC1060 | ZLPLL14G:QFN16 | IC2 |
| 1 | LM78M06 | ZLPLL14G:DPACK | IC1 |
| 1 | LOCK | ZLPLL14G:CHIPLED_0805 | LED2 |
| 1 | REF | ZLPLL14G:J502-ND-142-0711-821_826 | J3 |
| 1 | RF1 | ZLPLL14G:SMA-J797 | J2 |
| 1 | RF2 | ZLPLL14G:J502-ND-142-0711-821_826 | J6 |
| 1 | SOLDERJUMPERNC2 | ZLPLL14G:SJ_2S-NOTRACE | JP6 |
Similar boards
- 2 layers40 × 53.6 mm
- 6 layers150 × 100 mm
- 2 layers85 × 50 mm
APPMC
tdjastrzebski/All-Purpose-Power-Micro-Controller
General purpose power controller, capable of driving soldering irons using different voltages and probe types.
117 parts40 - 2 layers38.8 × 20.7 mm
- 4 layers70.1 × 89.6 mm
Hyperram cyclonev
embelon/hyperram_cyclonev_pcb
Simple PCB to connect HyperRAM memories to Cyclone V SoC Development Kit via HSMC connector
65 parts3Apache-2.0 - 2 layers70 × 76 mm
Control
Jochen0x90h/RoomControl
Smart home room controller based on nRF52840 with MQTT and and IEEE 802.15.4 radio support. Buttons and relays for lights and roller shutters can also be connected with a local bus using LIN physical layer
79 parts3 - 2 layers28.8 × 24.8 mm
Release modem mosfet atmega328p piezo
waynepiekarski/hydro-modem
HydroModem: Underwater Bell 103 modem implementation for low-power microcontrollers
48 parts3GPL-3.0
Questions
How big is the ZLPLL14G V4.1 PCB?
It measures 60.3 × 49.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ZLPLL14G V4.1 use?
103 parts, built around the ATMEGA328-PU, AVA-183A+, ADF5355BCPZ and LM78M06CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZLPLL14G V4.1 KiCad files?
From the zl2brg/ZLPLL repository on GitHub, at the commit this page was made from: the board is pcb/ZLPLL14G_V4.1/ZLPLL14G_V4.1.kicad_pcb and its schematic pcb/ZLPLL14G_V4.1/ZLPLL14G_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZLPLL14G V4.1 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).