Skip to the content
2 layers30.5 × 48.3 mmNano m0, the printed circuit board in 3D

cad files and example source code for the nano-m0 dev board

Size
30.5 × 48.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
24
Pads
110
Tracks, vias
283, 75
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Mar 2019
Updated
8 Mar 2019

Overview

Nano m0 is an open-source printed circuit board by zklapow, from the zklapow/nano-m0 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 30.5 × 48.3 mm with 26 parts on 24 nets, routed with 283 tracks and 75 vias.

It is built around the AP2112K-3.3TRG1. Its parts include 7 capacitors, 6 resistors, 4 connectors, 3 diodes and 2 ICs. It belongs with the microcontroller boards boards and the STM32 boards of this library.

Main components

1

README

README.md

NANO-M0

This repository contains the CAD files and sample code for the NANO-M0 dev board.

The KiCad board files can be found in the cad directory and source code for the sample program that ships with the NANO-M0 can be found in src

License

Both the CAD and software files for the NANO-M0 are licensed under the Apache 2.0 License.

Parts

26
QtyValueFootprintReferences
3100Resistors_SMD:R_0805R1, R2, R5
310kResistors_SMD:R_0805R3, R4, R6
31uFCapacitors_SMD:C_0805C1, C5, C6
222pFCapacitors_SMD:C_0805C3, C4
2Conn_01x10Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mmJ1, J2
2LEDLEDs:LED_0805D1, D2
2SW_SPSTButtons_Switches_SMD:SW_SPST_PTS810SW1, SW2
10.1uFCapacitors_SMD:C_0805C7
12.2uFCapacitors_SMD:C_0805C2
1500mAFuse_Holders_and_Fuses:Fuse_SMD1206_HandSolderingF1
1AP2112K-3.3TRG1AP2112K-3.3TRG1:SOT95P285X140-5NU1
1CrystalCrystals:Crystal_SMD_SeikoEpson_TSX3225-4pin_3.2x2.5mmY1
1PWRLEDs:LED_0805D3
1STM32F0706P6Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mmU2
1SWDPin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMDJ4
1USB_B_Microdigikey-footprints:USB_Micro_B_Female_10118194-0001LFJ3

Similar boards

  • 4 layers16.9 × 119.4 mmOrbit, the printed circuit board in 3D

    Orbit

    earthtojake/text-to-cad

    Design physical products with AI

    182 parts26kMIT
  • 6 layers84 × 98 mmFujiNet-5200-Rev0, the printed circuit board in 3D

    FujiNet-5200-Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    145 parts142
  • 2 layers25.4 × 54.5 mmRpi pico debugger shoe, the printed circuit board in 3D

    Rpi pico debugger shoe

    ShawnHymel/rpi-pico-debugger-shoe

    Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.

    49 parts84
  • 4 layers83 × 109 mmD4 small pcb panel, the printed circuit board in 3D

    D4 small pcb panel

    unsurv/unsurv-offline

    Offline portable GNSS device based on the ESP32

    522 parts72
  • 2 layers26 × 28 mmESP32-S3-Expansion, the printed circuit board in 3D

    ESP32-S3-Expansion

    SpacehuhnTech/framework

    ESP32-S3 Framework Expansion Card

    22 parts69CERN-OHL-P-2.0
  • 2 layers223.5 × 160 mmBase, the printed circuit board in 3D

    Base

    bread-modular/bread-modular

    Modular Synths for Everyone

    201 parts67MIT
  • 4 layers30 × 30 mmWiSer TTL, the printed circuit board in 3D

    WiSer TTL

    bitmerse/WiSer

    WiSer: Bringing wireless convenience to serial connectivity

    75 parts52
  • 4 layers100 × 100 mmV25Panel, the printed circuit board in 3D

    V25Panel

    maholli/SAM32

    Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32

    211 parts43

Questions

How big is the Nano m0 PCB?

It measures 30.5 × 48.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nano m0 use?

26 parts, built around the AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nano m0 KiCad files?

From the zklapow/nano-m0 repository on GitHub, at the commit this page was made from: the board is cad/nano_m0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nano m0 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).