
Pratham
PeriwalPratham/FlightController
A basic PCB design which contains all components for a solo yet affordable basic drone controller

Adjustable power supply based on USB PD (WIP)
Pd power supply is an open-source printed circuit board by ziteh, from the ziteh/pd-power-supply repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 100 × 50 mm with 110 parts on 90 nets, routed with 690 tracks and 234 vias.
It is built around the ADUM1201AR, TPS5431DDA and CH224Q, with the MP4245GVE, SS54 and ESDA25W among its other parts. Its parts include 33 capacitors, 31 resistors, 6 connectors, 5 ICs and 5 diodes. It belongs with the power boards and the STM32 boards of this library.
Adjustable power supply based on USB PD (Power Delivery).
WIP
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R13, R14, R15, R16, R21, R22, R23, R26, R27, R29, R31 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C12, C17, C22, C24, C25, C29, C30, C33 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C9, C11, C13, C27 |
| 6 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SB1, SB2, SB3, SB4, SB5, SB6 |
| 4 | 10R | Resistor_SMD:R_0402_1005Metric | R5, R6, R19, R20 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C14, C15 |
| 4 | 8.2pF | Capacitor_SMD:C_0402_1005Metric | C18, C19, C20, C21 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C1, C16 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 220nF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R28, R30 |
| 2 | ESDA25P35 | Diode_SMD:ST_QFN-2L_1.6x1.0mm | D1, D4 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 2 | SS54 | Diode_SMD:D_SMA | D3, D5 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 10nF 50V | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 10uF 50V | Capacitor_SMD:C_0805_2012Metric | C28 |
| 1 | 120k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 15uH | Inductor_SMD:L_Changjiang_FXL0630 | L2 |
| 1 | 20mR | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 220uF 10V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C32 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 4.7uH | Inductor_SMD:L_Changjiang_FXL1040 | L1 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 5.8k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 6.2k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 80.6k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 8MHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | ADuM1201AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | BOOT0 | Button_Switch_SMD:SW_SPST_TL3342 | SW4 |
| 1 | BTN_A | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | BTN_B | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | CH224Q | pd_power_supply:DFN-10_EP_2x2_Pitch0.4mm | U2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Display | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | ESDA25W | Package_TO_SOT_SMD:SOT-323_SC-70 | D2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Green | LED_SMD:LED_0805_2012Metric | LD1 |
| 1 | MP4245 | th_lib:QFN-21_MP4245_MNP | U1 |
| 1 | NTC 10k | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | SW3 |
| 1 | Red | LED_SMD:LED_0805_2012Metric | LD2 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MountingHoles | ENC1 |
| 1 | STM32F030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | TPS5431 | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | VIN | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | VOUT+ | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | VOUT+ | TestPoint:TestPoint_THTPad_D4.0mm_Drill2.0mm | J2 |
| 1 | VOUT- | TestPoint:TestPoint_THTPad_D4.0mm_Drill2.0mm | J3 |
| 1 | VOUT- | TestPoint:TestPoint_Pad_D1.0mm | TP4 |

PeriwalPratham/FlightController
A basic PCB design which contains all components for a solo yet affordable basic drone controller

Shanshan3133/automated-hardware-validation-framework
KiCad protected buck converter with Python-based automated hardware validation, fault injection, and CI reporting




jvanderberg/minipc-power
Small power board for MCU-based emulator builds (Pico / ESP32 class with a 12 V 5" LCD). Runs from USB-C or a 1S2P 18650 pack, charges the pack whenever USB-C is plugged in, and supplies 12 V, 5 V and 3.3 V.

Yongci/EnvDaqBox-PCB
This is a development board designed for automated flower watering or smart agriculture, primarily used for controlling the watering and lighting systems. It is currently under development.

PaulBichl/VibePCB-bench-psu
USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
110 parts, built around the ADUM1201AR, TPS5431DDA, CH224Q and MP4245GVE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ziteh/pd-power-supply repository on GitHub, at the commit this page was made from: the board is pd_power_supply.kicad_pcb and its schematic mcu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).