
FujiNet StudioII Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware

A KiCAD version of IceCore Lattice FPGA board
IceCore is an open-source printed circuit board by zinka, from the zinka/IceCore-KiCAD repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 50 mm with 131 parts on 208 nets, routed with 3,444 tracks and 309 vias.
Its parts include 60 capacitors, 33 resistors, 11 diodes, 6 ICs and 6 connectors. It belongs with the fPGA and programmable logic boards of this library.
A KiCAD version of IceCore (https://github.com/folknology/IceCore) Lattice FPGA board
Top View

Bottom View

| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | CAP-000004-00 | Capacitor_SMD:C_0402_1005Metric | C2, C12, C13, C19, C21, C22, C23, C25, C27, C28, C29, C30, C31, C33, C36, C37 +17 |
| 17 | RES-000076-00 | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R16, R17, R18, R20, R21, R23, R24, R25, R26, R31, R32 +1 |
| 11 | CAP-000178-00 | Capacitor_SMD:C_0603_1608Metric | C14, C20, C26, C35, C38, C43, C44, C45, C49, C55, C61 |
| 8 | CAP-000182-00 | Capacitor_SMD:C_0402_1005Metric | C8, C9, C10, C11, C15, C16, C17, C18 |
| 8 | DIO-000055-00 | LED_SMD:LED_0603_1608Metric | D1, D5, D6, D7, D8, D9, D10, D11 |
| 8 | RES-000092-00 | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R11, R12, R13, R14, R15 |
| 4 | CAP-000164-00 | Capacitor_SMD:C_0805_2012Metric | C24, C34, C46, C60 |
| 4 | MountingHole_Pad | HCS:2.5MM-HOLE | H1, H2, H3, H4 |
| 3 | MEC-000189-00 | HCS:PTS636SL43SMTRLFS | S1, S2, S3 |
| 3 | RES-000074-00 | Resistor_SMD:R_0402_1005Metric | R22, R29, R30 |
| 3 | RES-000166-00 | Resistor_SMD:R_0402_1005Metric | R27, R33, R34 |
| 2 | CAP-000017-00 | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | CAP-000168-00 | Capacitor_SMD:C_0402_1005Metric | C32, C56 |
| 2 | CON-000177-00 | Connector_PinSocket_1.27mm:PinSocket_2x25_P1.27mm_Vertical_SMD | J1, J3 |
| 2 | CON-000183-00 | HCS:USB_Micro_B_Female_10118193-0001LF | J4, J5 |
| 2 | DIO-000179-00 | Diode_SMD:D_SOD-123F | D2, D3 |
| 2 | IND-000181-00 | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L1, L2 |
| 2 | PWR-000165-00 | Package_TO_SOT_SMD:TSOT-23-5 | U3, U5 |
| 2 | RES-000167-00 | Resistor_SMD:R_0402_1005Metric | R19, R28 |
| 1 | CLK-000184-00 | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | CLK-000185-00 | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y2 |
| 1 | CON-000174-00 | HCS:AMPHENOL_1140084168 | J6 |
| 1 | CON-000176-00 | HCS:HDMI_Mini_Female_2001-1-2-21-00-BK | J2 |
| 1 | DIO-000186-00 | Diode_SMD:D_SOD-323 | D4 |
| 1 | ICS-000169-00 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | ICS-000170-00 | Package_QFP:TQFP-144_20x20mm_P0.5mm | U4 |
| 1 | ICS-000172-00 | HCS:TSOP-2-50 | U6 |
| 1 | ICS-000173-00 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | IND-000180-00 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | PRO-000190-00 | Fuse:Fuse_1210_3225Metric | F1 |
The 129 most common of 131 parts.

FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware


azonenberg/reworkctf
This is a points-based challenge board intended for practicing of PCB rework and circuit editing skills. This is not a circuit debug challenge.

ShaneTWilliams/worlds-worst-graphics-card
Custom HDMI transmitter PCB with 480 MHz STM32H7 microcontroller


stanford-ssi/samwise-avionics
Avionics for 2U Rev of Sputnik Satellite

Architeuthis-Flux/Barnacle_Board
a breadboard you can stick things to

randomplum/autoliv_nv3_uvc
Adapter for the Autoliv NV3 sensor providing USB video device class output
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
131 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zinka/IceCore-KiCAD repository on GitHub, at the commit this page was made from: the board is IceCore.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).