4 layers116.8 × 121.8 mm
Se30
rhalkyard/SEthernet
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
50 parts167GPL-3.0
6 layers120 × 48 mm
Sethernet30 Combo
ZigZagJoe/SEthernet-Combo4derivative PCB of rhalkyard/SEthernet for use in soldering directly to other PDS cards.
- Size
- 120 × 48 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 147
- Pads
- 501
- Tracks, vias
- 1,671, 235
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jan 2025
- Updated
- 29 Jan 2025
Overview
Sethernet30 Combo is an open-source printed circuit board by ZigZagJoe, from the ZigZagJoe/SEthernet-Combo repository on GitHub. It is a 6-layer board of 120 × 48 mm with 53 parts on 147 nets, routed with 1,671 tracks and 235 vias.
It is built around the PT61017PEL. Its parts include 24 capacitors, 12 resistors, 4 ICs, 4 connectors and 1 crystal. It belongs with the FPGA and CPLD boards of this library.
Main components
1README
README.mdThis is a deriviative of SEThernet: Please see here first. https://github.com/rhalkyard/SEthernet
This PCB is intended to be soldered directly to a second PDS card in order to make a "single" combination card. Something of an experiment but does work.
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C8, C11, C13, C19, C22, C23 |
| 7 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C14, C15, C17, C18, C21, C24 |
| 4 | 49.9 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5, R7 |
| 2 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C16 |
| 2 | 18pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 6.8nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12 |
| 2 | 75 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | MountingHole | SockeBooster:JLC_ToolHole | H1, H2 |
| 2 | SolderJumper_2_Open | SockeBooster:SolderJumper-2-Open 1MM | JP1, JP2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP6 |
| 1 | 1000pF 2KV | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C20 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 10R 1/12W | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 12.4K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | ATF1502AS-xAx44 | SockeBooster:TQFP-44_10x10mm_P0.8mm_HandSolder | U4 |
| 1 | COMBO PDS | SockeBooster:650949-5 RA MALE | J4 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J2 |
| 1 | ENC624J600-PT | SockeBooster:TQFP-64_10x10mm_P0.5mm_HandSolder | U2 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | JTAG | SockeBooster:PinHeader_1x07_P2.54mm_VerticalOffset | J3 |
| 1 | LB PDS | SockeBooster:650949-5 RA MALE | J1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | PT61017PEL | Transformer_SMD:Transformer_Ethernet_Bourns_PT61017PEL | TR1 |
| 1 | SST39SF010_TSOP | SockeBooster:TSOP-I-32_11.8x8mm_P0.5mm_HandSolder | U1 |
Questions
How big is the Sethernet30 Combo PCB?
It measures 120 × 48 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Sethernet30 Combo use?
53 parts, built around the PT61017PEL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sethernet30 Combo KiCad files?
From the ZigZagJoe/SEthernet-Combo repository on GitHub, at the commit this page was made from: the board is Sethernet30 Combo.kicad_pcb and its schematic Sethernet30 Combo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sethernet30 Combo design in my own project?
Its repository states no licence, so its author keeps all rights: ask ZigZagJoe before reusing the design.
Similar boards
- 2 layers44.5 × 44.5 mm
- 2 layers191.5 × 100 mm
HyperNet-2-MainBoard
TheStaticTurtle/HyperNet
HyperNet is an 8-in, 8-out open-source audio stagebox based on Ultranet
232 parts6MIT - 4 layers83 × 106 mm
- 2 layers95 × 85 mm
NUC980
TreeNewbeer/Coonix
Coonix is a funny project about building a application platform in Allwinner-v3s processor.
172 parts4 - 2 layers60.3 × 52.7 mm
- 2 layers18.3 × 43.7 mm
- 2 layers60 × 46 mm
