Skip to the content
2 layers60 × 46 mmModule, the printed circuit board in 3D

Hardware module for 802.3 PD power

Size
60 × 46 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
105
Pads
241
Tracks, vias
12, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Apr 2019
Updated
26 Apr 2026

Overview

Module is an open-source printed circuit board by vd-rd, from the vd-rd/hw_cape_poe repository on GitHub. It is a 2-layer board of 60 × 46 mm with 51 parts on 105 nets, routed with 12 tracks and 0 vias.

It is built around the SI34061-A-GM and PT61017PEL. Its parts include 25 resistors, 10 capacitors, 5 connectors and 1 IC.

Main components

2

README

README.md

Description

This PoE modules are designed to extract power from Ethernet cables using IEEE802.3 standard, as well as providing a RMII link from the PHY onboard. Additionaly the board is equipped with a standard USB 2.0 dual connector.

Features

  • IEEE802.3 compliant (additional information can be found in PoE Versions
  • Input voltage range 36-57V
  • Isolated DC/DC converter
  • 10/100 Mbps PHY
  • RMII pins on header
  • USB port pins on header

Resources

You can find all necesary information to build or evaluate the module here:

Parts

51
QtyValueFootprintReferences
120Resistor_SMD:R_0603_1608MetricR14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25
4100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C4, C5
475Resistor_SMD:R_0603_1608MetricR10, R11, R12, R13
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965H1, H2, H3, H4
3Conn_01x08Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_VerticalJ3, J4, J4
3FiducialFiducial:Fiducial_0.75mm_Mask1.5mmFID1, FID2, FID3
21Resistor_SMD:R_1206_3216MetricR4, R8
210nFCapacitor_SMD:C_0603_1608MetricC9, C10
21nFCapacitor_SMD:C_0603_1608MetricC7, C8
110Resistor_SMD:R_0402_1005MetricR9
1110kResistor_SMD:R_0402_1005MetricR2
115nFCapacitor_SMD:C_0402_1005MetricC3
1220nFCapacitor_SMD:C_0402_1005MetricC6
124.3kResistor_SMD:R_0402_1005MetricR3
13Resistor_SMD:R_0402_1005MetricR5
148.7Resistor_SMD:R_0402_1005MetricR1
15.1kResistor_SMD:R_0402_1005MetricR6
1510Resistor_SMD:R_0402_1005MetricR7
1HC-PM254-5-0H 02x18connector:PinSocket_2x18_P2.54mm_Vertical_SMDJ2
1PT61017PELTransformer_SMD:Transformer_Ethernet_Bourns_PT61017PELTR1
1RJ45_LED_Shieldedconnector:RC01812J1
1SI34061-A-GMPackage_DFN_QFN:QFN-24-1EP_5x5mm_P0.65mm_EP3.25x3.25mm_ThermalViasU1
1~bourns:POExxx-PDTR2

The 50 most common of 51 parts.

More from vd-rd/hw_cape_poe

1
  • 2 layers60 × 40 mmDual eth, the printed circuit board in 3D

    Dual eth

    vd-rd/hw_cape_poe

    Hardware module for 802.3 PD power

    11 parts1

Similar boards

  • 4 layers116.8 × 121.8 mmSe30, the printed circuit board in 3D

    Se30

    rhalkyard/SEthernet

    Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30

    50 parts167GPL-3.0
  • 2 layers44.5 × 44.5 mmSwitchBlox, the printed circuit board in 3D

    SwitchBlox

    msadowski/SwitchBlox

    Compact and robust 10/100MB 5 Port Ethernet Switch

    86 parts30
  • 2 layers191.5 × 100 mmHyperNet-2-MainBoard, the printed circuit board in 3D

    HyperNet-2-MainBoard

    TheStaticTurtle/HyperNet

    HyperNet is an 8-in, 8-out open-source audio stagebox based on Ultranet

    232 parts6MIT
  • 4 layers83 × 106 mmAsynthosc, the printed circuit board in 3D

    Asynthosc

    everedero/asynth2osc

    Modular analog synth to OpenOSC bridge

    268 parts4GPL-3.0
  • 2 layers95 × 85 mmNUC980, the printed circuit board in 3D

    NUC980

    TreeNewbeer/Coonix

    Coonix is a funny project about building a application platform in Allwinner-v3s processor.

    172 parts4
  • 6 layers120 × 48 mmSethernet30 Combo, the printed circuit board in 3D

    Sethernet30 Combo

    ZigZagJoe/SEthernet-Combo

    derivative PCB of rhalkyard/SEthernet for use in soldering directly to other PDS cards.

    53 parts4
  • 2 layers60.3 × 52.7 mmChassis, the printed circuit board in 3D

    Chassis

    crawford/PoE

    A base platform for PoE peripherals

    108 parts3GPL-3.0
  • 2 layers18.3 × 43.7 mmHp il, the printed circuit board in 3D

    Hp il

    gIzFer/hpil

    HP-IL to serial/usb translator/bridge

    26 parts1AGPL-3.0

Questions

How big is the Module PCB?

It measures 60 × 46 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Module use?

51 parts, built around the SI34061-A-GM and PT61017PEL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Module KiCad files?

From the vd-rd/hw_cape_poe repository on GitHub, at the commit this page was made from: the board is eth/module/module.kicad_pcb and its schematic dual-eth/dual-eth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Module design in my own project?

Its repository states no licence, so its author keeps all rights: ask vd-rd before reusing the design.