2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers35.6 × 68.6 mm
Can arduino mini pcb
ZeusWPI/OBUS3You see an armed time bomb but don't know how to disarm it. Your friends found a manual to defuse the bomb and you have them on call.
- Size
- 35.6 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 32
- Pads
- 79
- Tracks, vias
- 62, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jul 2020
- Updated
- 1 Dec 2023
Overview
Can arduino mini pcb is an open-source printed circuit board by ZeusWPI, from the ZeusWPI/OBUS repository on GitHub, published under the MIT licence. It is a 2-layer board of 35.6 × 68.6 mm with 10 parts on 32 nets, routed with 62 tracks and 2 vias.
Its parts include 4 connectors, 2 resistors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdOntmijnen van een Bom vereist Uitstekende Samenwerking
You see an armed time bomb but don't know how to disarm it. Your friends found a manual to defuse the bomb and you have them on call. This is the premise of the game OBUS, a hardware project by Zeus WPI. Inspired by the amazing software game Keep Talking and Nobody Explodes.
Get started writing a module
These are the instructions for building your own OBUS module with an Arduino Nano v3 and the custom PCB. If you're using other hardware, you might need to do some things differently.
- (Read the "Getting started guide" to get a general idea of how OBUS works.)
- Install the Arduino IDE.
- Clone this repository with Git in a permanent location on your drive.
- Symlink the library:
ln -s /ABSOLUTE/PATH/TO/REPO/lib /PATH/TO/Arduino/libraries/obus(on most Linux distro's, this the Arduino folder is in$HOME/Arduino) - Follow these steps to install the CAN library
- Execute
./src/new_module.shto create a new module. When asked for a type, you'll probably want to choose 'puzzle'. - Edit the newly generated .ino file, either in the Arduino IDE or in your own editor.
- In the Arduino IDE, select the correct board (Arduino Nano) and processor (ATmega328P (Old Bootloader)). After that, flash your code to the Arduino and test it out.
- On some Linux distributions, you'll need to prevent BRLTTY from taking over the serial adapter because BRLTTY thinks it's a Braille keyboard. You can do this by uninstalling it (
pacman -R brltty) or by disabling it and then rebooting. - If you get permission errors, try adding yourself to the dialout or uucp (Arch Linux) group
Background
Game
The game is played by at least two players. The goal is to defuse a bomb, this is accomplished by defusing every module on that bomb before the bomb timer runs out.
There are two roles:
- Expert: this person can read the manual about how to defuse the bomb, but cannot see nor interact with the bomb
- Defuser: this person can see and interact with the bomb, but cannot read the manual
These two roles can communicate with each other. To successfully defuse the bomb, they must communicate efficiently and clearly. If a mistake is made, the team gets a strike. If they get too many strikes or the timer runs out, the bomb explodes.
Common wiring between all modules
- CAN-H: red on JST 3 pin connectors, purple on CAN wire
- CAN-L: white on JST 3 pin connectors, brown on CAN wire
- +12V: red on 2 pin JST connector and power wire
- ground: black on 2 pin JST connector, no color on power wire
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_01x15_Female | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | CAN_MODULE | Zeusbadge:logo_small | U1 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Female | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | LED_RCGB | LED_THT:LED_D5.0mm-4_RGB | D1 |
Questions
How big is the Can arduino mini pcb PCB?
It measures 35.6 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Can arduino mini pcb use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Can arduino mini pcb KiCad files?
From the ZeusWPI/OBUS repository on GitHub, at the commit this page was made from: the board is pcb/can_arduino_mini_pcb/can_arduino_mini_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Can arduino mini pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0