

Ina3221-mcu
proto-type stm32 mcu project
- Size
- 57 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 49
- Pads
- 168
- Tracks, vias
- 336, 17
- Routed
- Yes
- KiCad
- KiCad 8.00 (file 20240225)
- Created
- 27 Mar 2024
- Updated
- 11 Sep 2025
Overview
Ina3221-mcu is an open-source printed circuit board by zetta-shao, from the zetta-shao/G030_OLED repository on GitHub. It is a 2-layer board of 57 × 44 mm with 45 parts on 49 nets, routed with 336 tracks and 17 vias.
It is built around the CJ78L05 and XC6206-2.8V. Its parts include 11 resistors, 10 capacitors, 9 connectors, 4 ICs and 3 switches. It belongs with the STM32 boards of this library.
Main components
2CJ78L05
SOT-89-3L-40℃~+125℃@(Tj) 1 1.7V 100mA 26mA 30V 42uV 49dB@(120Hz) 5V Fixed Positive SOT-89-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJiangsu Changjing Electronics Technology (CJ)Voltage Regulators - Linear, Low Drop Out (LDO) RegulatorsXC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R9, R11 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C9, C10 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C7, C8 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1, SW2, SW3 |
| 2 | 0.05 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 4.7K | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2 |
| 2 | BAT0P | Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm | J3, J7 |
| 2 | BAT_O_0P | Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm | J4, J11 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 1 | 0.04 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 20Vin | Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm | J16 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 910K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | BAT1P | Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm | J9 |
| 1 | BAT_O_1P | Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm | J13 |
| 1 | CJ78L05 | Package_TO_SOT_SMD:SOT-89-3 | U3 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_1.00mm:PinHeader_1x08_P1.00mm_Vertical | J1 |
| 1 | GND | Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm | J2 |
| 1 | INA3221 | Package_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U1 |
| 1 | OLED-128O064D | Display:OLED-128O064D | DS1 |
| 1 | STM32G030F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | XC6206 | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | ~ | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
Similar boards
- 2 layers

- 4 layers70 × 70 mm

Ai camera
maxlab-io/tokay-lite-pcb
Tokay AI Camera - ESP32 camera development board
161 parts130CERN-OHL-P-2.0 - 2 layers229.8 × 102.6 mm

- 2 layers17.4 × 60.6 mm

- 4 layers40.1 × 39.8 mm

Stm32g431-mt6701-stspin233
VIPQualityPost/aioli-foc
Small, simple closed loop BLDC driver implementing SimpleFOC
90 parts37 - 2 layers185.3 × 68 mm

- 2 layers253.3 × 113.3 mm

- 2 layers344.7 × 123.6 mm

Questions
How big is the Ina3221-mcu PCB?
It measures 57 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ina3221-mcu use?
45 parts, built around the CJ78L05 and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ina3221-mcu KiCad files?
From the zetta-shao/G030_OLED repository on GitHub, at the commit this page was made from: the board is kicad-proj/ina3221-mcu.kicad_pcb and its schematic kicad-proj/ina3221-mcu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ina3221-mcu design in my own project?
Its repository states no licence, so its author keeps all rights: ask zetta-shao before reusing the design.