

Simple ir tx rx
ZeroPhone mod board PCB files
- Size
- 19.3 × 14.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 9
- Pads
- 34
- Tracks, vias
- 87, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2017
- Updated
- 19 Apr 2019
Overview
Simple ir tx rx is an open-source printed circuit board by ZeroPhone, from the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.3 × 14.5 mm with 14 parts on 9 nets, routed with 87 tracks and 3 vias.
Its parts include 5 resistors, 3 capacitors, 2 diodes, 2 transistors and 1 IC.
README
README.mdZeroPhone-Mod-PCBs
ZeroPhone mod board PCB files
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C_Small | Capacitors_SMD:C_0805 | C1, C2, C3 |
| 3 | R_Small | Resistors_SMD:R_0603_HandSoldering | R3, R4, R5 |
| 2 | LED | LEDs:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1, D2 |
| 2 | R_Small | Resistors_SMD:R_0805 | R1, R2 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |
| 1 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Q_PMOS_GSD | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q2 |
| 1 | TSOP45xx | Opto-Devices:IRReceiver_Vishay_MOLD-3pin | U1 |
More from ZeroPhone/ZeroPhone-Mod-PCBs
12- 2 layers35.6 × 30.5 mm

- 2 layers

- 2 layers17 × 36.8 mm

- 2 layers40 × 60 mm

- 2 layers40 × 60 mm

- 2 layers40 × 36 mm

- 2 layers36.5 × 31 mm

- 2 layers12.7 × 13.5 mm

- 2 layers26 × 17.2 mm

- 2 layers40 × 10 mm

- 2 layers40 × 27.5 mm

- 2 layers26 × 18 mm

Similar boards
- 2 layers116.8 × 30 mm

Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm

- 2 layers34 × 45 mm

2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm

- 2 layers45.3 × 42.7 mm

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm

- 2 layers62 × 24 mm

Questions
How big is the Simple ir tx rx PCB?
It measures 19.3 × 14.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simple ir tx rx use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simple ir tx rx KiCad files?
From the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, at the commit this page was made from: the board is simple_ir_tx_rx/simple_ir_tx_rx.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simple ir tx rx design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).