

Esp12 1button 6leds
ZeroPhone mod board PCB files
- Size
- 16 × 24 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 28
- Pads
- 70
- Tracks, vias
- 110, 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2017
- Updated
- 19 Apr 2019
Overview
Esp12 1button 6leds is an open-source printed circuit board by ZeroPhone, from the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 16 × 24 mm with 15 parts on 28 nets, routed with 110 tracks and 7 vias.
It is built around the ESP-12E. Its parts include 7 resistors, 6 diodes, 1 IC and 1 switch. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdZeroPhone-Mod-PCBs
ZeroPhone mod board PCB files
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7 |
| 6 | LED | Diodes_SMD:D_0805 | D1, D2, D3, D4, D5, D6 |
| 1 | ESP-12E | footprints:ESP12_BASE | U1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_EVQP7C | SW1 |
More from ZeroPhone/ZeroPhone-Mod-PCBs
12- 2 layers35.6 × 30.5 mm

- 2 layers

- 2 layers17 × 36.8 mm

- 2 layers40 × 60 mm

- 2 layers40 × 60 mm

- 2 layers40 × 36 mm

- 2 layers36.5 × 31 mm

- 2 layers12.7 × 13.5 mm

- 2 layers26 × 17.2 mm

- 2 layers40 × 10 mm

- 2 layers40 × 27.5 mm

- 2 layers26 × 18 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers43 × 34.3 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm

SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm

Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm

Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm

- 2 layers100 × 45 mm

Questions
How big is the Esp12 1button 6leds PCB?
It measures 16 × 24 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp12 1button 6leds use?
15 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp12 1button 6leds KiCad files?
From the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, at the commit this page was made from: the board is esp12_1button_6leds/esp12_1button_6leds.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp12 1button 6leds design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).