4 layers58 × 47 mm
4 layers207.4 × 21 mm
PenabledDisplay
zephray/PenabledDisplay7Mod a ThinkPad X200T display into a USB-C pen display
- Size
- 207.4 × 21 mm
- Copper layers
- 4
- Thickness
- 1.01 mm
- Parts
- 97
- Nets
- 137
- Pads
- 500
- Tracks, vias
- 1,487, 229
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2021
- Updated
- 3 Apr 2022
Overview
PenabledDisplay is an open-source printed circuit board by zephray, from the zephray/PenabledDisplay repository on GitHub, published under the MIT licence. It is a 4-layer board of 207.4 × 21 mm with 97 parts on 137 nets, routed with 1,487 tracks and 229 vias.
It is built around the RP2040, FM25Q04-DN-T-G and FUSB302UCX, with the SY7152ABC, CBTL02043ABQ and NX3P1108UK among its other parts. Its parts include 41 capacitors, 18 resistors, 9 ICs, 5 diodes and 5 connectors. It belongs with the RP2040 boards of this library.
Main components
9
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
FM25Q04-DN-T-G
TDFN-8-EP(2x3)-40℃~+85℃ 1.5ms 100,000 cycles 104MHz 1uA 2.3V~3.6V 20 Years 4Mbit SPI TDFN-8-EP(2x3) NOR FLASH ROHSFUDAN MICRONOR FLASH
FUSB302UCX
WLCSP-9(1.2x1.2)-40℃~+85℃ 1 2.8V~5.5V 25uA Controller USB Type-C 1.1 WLCSP-9(1.2x1.2) USB Converters ROHSonsemiUSB Converters
SY7152ABC
SOT-23-6-40℃~+125℃@(TJ) 1 100uA 2A 3V~8V 800kHz~1.2MHz Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS矽力杰silergyDC-DC Converters
CBTL02043ABQ
UncategorisedNexperia
NX3P1108UK
BGA4Logic Controlled High-side Power SwitchNXP SemiconductorsUncategorisedPTN3460
QFN56_7x7QFN56_7x7 New Arrivals ROHSNXP SemiconductorsUncategorised
SY80082
TSOT-23-5_L2.9-W1.6-P0.95-LS2.8-BRTSOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR SMT ROHSSilergy CorpUncategorised
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C12, C13, C14, C15, C16, C17, C23, C24, C25, C26, C27, C28, C29 +11 |
| 6 | 10uF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C30, C31, C33, C34 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C20, C21, C22, C32 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R7, R8, R9, R10 |
| 5 | 4.7K | Resistor_SMD:R_0402_1005Metric | R2, R3, R11, R12, R13 |
| 5 | SKQG | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1, SW2, SW3, SW4, SW5 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 120 | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H4, H5 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 10uH | Inductor_SMD:L_Vishay_IHLP-1616 | L4 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D5 |
| 1 | 200K | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 24MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | 36K | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 4.7uH | Inductor_SMD:L_Vishay_IHLP-1212 | L3 |
| 1 | 8.25K | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | CBTL02043A | Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm | U9 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J3 |
| 1 | Conn_01x40_MountingPin | footprints:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal_Reversed | J5 |
| 1 | ER-TFT0.96-1 | footprints:FPC_13_B | J1 |
| 1 | FM25Q04-DN-T-G | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm | U2 |
| 1 | FUSB302UCX | Package_BGA:WLP-9_1.448x1.468mm_Layout3x3_P0.4mm_Ball0.27mm_Pad0.25mm | U5 |
| 1 | MountingHole | footprints:MountingHole_1.7mm | H6 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H3 |
| 1 | NX3P1108UK | Package_CSP:WLCSP-4-X1-WLB0909-4_0.89x0.89mm_P0.5mm | U8 |
| 1 | PTN3460 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm_ThermalVias | U1 |
| 1 | SY7152 | Package_TO_SOT_SMD:TSOT-23-6 | U7 |
| 1 | SY8008 | Package_TO_SOT_SMD:TSOT-23-5 | U4 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U3 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J2 |
Questions
How big is the PenabledDisplay PCB?
It measures 207.4 × 21 mm and has 4 copper layers, 1.01 mm thick.
What parts does the PenabledDisplay use?
97 parts, built around the RP2040, FM25Q04-DN-T-G, FUSB302UCX and SY7152ABC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PenabledDisplay KiCad files?
From the zephray/PenabledDisplay repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PenabledDisplay design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers39 × 45 mm
Gbastn
zephray/GbaStnMod
The hardware design is released under the CERN Open Source Hardware License strongly-reciprocal variant, CERN-OHL-S. A copy of the license is provided in the source repository.
66 parts11 - 4 layers90 × 80 mm
Glider
pdyxs/glider
Fork of zephray/glider (Modos Glider e-ink monitor) with a DP AUX polarity fix and a standalone GCC firmware build
379 partsCERN-OHL-S-2.0 - 2 layers100 × 60 mm
Main pcb
zephray/Preader
eBook Reader based on Raspberry Pi RP2040 MCU and ZBD Bistable LCD
109 parts4MIT - 4 layers71.6 × 73.2 mm
Ioboard
CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…
222 parts82MIT - 4 layers32 × 39 mm
- 4 layers152 × 65.2 mm
- 6 layers200 × 75 mm
