2 layers157 × 58.5 mm
2 layers
MCT19
ZeniteSolar/MCT19Modulo de controle de temperatura, com modulo wifi
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 41
- Pads
- 101
- Tracks, vias
- 189, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jan 2019
- Updated
- 26 Dec 2019
Overview
MCT19 is an open-source printed circuit board by ZeniteSolar, from the ZeniteSolar/MCT19 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 29 parts on 41 nets, routed with 189 tracks and 0 vias.
It is built around the LM324, L7805 and IRF530, with the LL4148 and SI2308CDS-T1-GE3-VB among its other parts. Its parts include 10 capacitors, 4 resistors, 4 ICs, 3 connectors and 2 transistors. It belongs with the radio and wireless and power boards and the ESP8266 boards of this library.
Main components
5
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRF530
TO-220-55℃~+175℃ 1 N-channel 1.8V 100V 110pF 15A 16nC@10V 31W 680pF 80mΩ@10V、90mΩ@4.5V 85pF N-Channel TO-220 MOSFETs ROHSMinosMOSFETs
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
SI2308CDS-T1-GE3-VB
SOT-23(TO-236)MOSFETsVBsemi Elec
README
README.mdMCT19
Modulo de controle de temperatura, com modulo wifi
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C9, C10 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 2 | 16k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 10u | Capacitor_SMD:C_2512_6332Metric_Pad1.52x3.35mm_HandSolder | C4 |
| 1 | 50k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | Fan | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Irf530 | KicadZeniteSolarLibrary18:TO-220-3_Horizontal_TabDown_SMD | Q1 |
| 1 | L7805 | KicadZeniteSolarLibrary18:TO-220-3_Horizontal_TabDown_SMD | U2 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF_Handsoldering | D2 |
| 1 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92L_Inline | U4 |
| 1 | Net-Tie_2 | KicadZeniteSolarLibrary18:NetTie-2_SMD_Pad_50mil | NT1 |
| 1 | NodeMCU1.0(ESP-12E) | KicadZeniteSolarLibrary18:NodeMCU-LoLinV3 | U3 |
| 1 | SI2308CDS-T1-GE3 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2 |
| 1 | Sensor | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | Vin | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
Questions
What parts does the MCT19 use?
29 parts, built around the LM324, L7805, IRF530 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCT19 KiCad files?
From the ZeniteSolar/MCT19 repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/MCT19_Sensor_Project/MCT19.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCT19 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers122.6 × 52.7 mm
- 2 layers127.5 × 68 mm
- 2 layers107.5 × 120 mm
Load
joaomariolago/ifsc-pi3-eletronic-load
Simple eletronic load with WiFi integration and preprogramed operation curves
135 partsApache-2.0 - 2 layers185 × 98 mm
- 2 layers160 × 100 mm
- 2 layers70.3 × 57.5 mm
- 2 layers202.2 × 131 mm
New system
MadsRudolph/62768-energy-system
Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…
131 parts