

Rpi hat
- Size
- 27.4 × 19.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 19
- Pads
- 36
- Tracks, vias
- 31, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Oct 2021
- Updated
- 22 Oct 2021
Overview
Rpi hat is an open-source printed circuit board by Zeko369, from the Zeko369/kicad-tutorial repository on GitHub. It is a 2-layer board of 27.4 × 19.6 mm with 9 parts on 19 nets, routed with 31 tracks and 4 vias.
It is built around the DHT22. Its parts include 4 resistors, 2 diodes, 1 IC, 1 connector and 1 switch.
Main components
1README
README.mdKicad like a pro
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 330R | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | DHT22 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | SW_DPST | freetronics_footprints:SW_PUSHBUTTON_PTH | SW1 |
More from Zeko369/kicad-tutorial
3- 2 layers38.3 × 29.8 mm

- 2 layers30.1 × 52.1 mm

- 2 layers13.5 × 16 mm

Similar boards
- 2 layers271.8 × 114.3 mm

Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers104.8 × 72.1 mm

SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers40.6 × 50.8 mm

Iot sourdough starter monitor
justinmklam/iot-sourdough-starter-monitor
Tracking the fermentation of sourdough starter over the cloud.
7 parts93GPL-3.0 - 2 layers28 × 13 mm

DHT22 pcb
MakersAsylumIndia/M19O2
M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle
5 parts68MIT - 2 layers136 × 100 mm

ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 2 layers162 × 60 mm

Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers74.9 × 40.6 mm

Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17 - 2 layers81.3 × 36.8 mm

AirQualitySensor
Finomnis/AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
44 parts16Apache-2.0
Questions
How big is the Rpi hat PCB?
It measures 27.4 × 19.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi hat use?
9 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi hat KiCad files?
From the Zeko369/kicad-tutorial repository on GitHub, at the commit this page was made from: the board is rpi-hat/rpi-hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask Zeko369 before reusing the design.