
Daughter board
zegonix/custom-cycle7-pcb
Custom pcb for the CYCLE7 by TKD with hotswap sockets and split space layout. It also features a decent mcu..

Custom pcb for the CYCLE7 by TKD with hotswap sockets and split space layout. It also features a decent mcu..
Cycle-7 is an open-source printed circuit board by zegonix, from the zegonix/custom-cycle7-pcb repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 347.7 × 94.2 mm with 177 parts on 135 nets, routed with 938 tracks and 526 vias.
It is built around the SRV05-4 and WS2812B. Its parts include 74 diodes, 13 capacitors, 7 switches, 3 resistors and 3 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
This repository holds the design sources for a custom PCB and plate for the cycle 7 by TKD. I ordered a prototype and got that working but I do not guarantee anything.
Note that I used a 12 MHz oscillator instead of an 8 MHz which would be QMKs default frequency for the STM32F401. That is no problem, but requires a little extra configuration. If you don't fancy that, change the oscillator circuit to 8 MHz.
Also the design replaces the standard 6.25u spacebar with a 1.25u key, a 2.75u key and a 2.25u key (in this order from the left). Very few keycap sets come with a 1.25 spacebar key, so you might want to change the design to use a different spacebar configuration. If you do that you also need to adjust the plate. If you plan to use the original plate of the cycle 7 you need to change the pcb design to a default 6.25u spacebar.
Why make my own pcb for the cycle 7? Bootloader on TKD's PCB is shit does not comply with my requirements. Also the firmware is proprietary.
What about this PCB? Sources are here and free to use however you want. However use at your own risk, I do not guarantee any of this to be functional The QMK configuration for the keyboard is available at zegonix/zegonix-qmk-configs/zegonix/cycle7. Follow the steps described in the readme file to link the folder into your local qmk repository and build the firmware.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 73 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +57 |
| 62 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX18, MX19, MX20, MX21, MX22, MX23, MX24 +46 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C7, C10, C11 |
| 8 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_1.25u | MX61, MX62, MX63, MX64, MX67, MX68, MX69, MX70 |
| 3 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.25u | S2, S4, S6 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_1.5u | MX17, MX29 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.75u | S3, S5 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_MountingPin | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J1 |
| 1 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_1.75u | MX33 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S1 |
| 1 | SRV05-4 | PCM_marbastlib-various:SOT-23-6-routable | U2 |
| 1 | STM32F401RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | WS2812B | lib-zegonix:SK6812MINI-E_3.2x2.8_reverse_mount | D74 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U1 |

zegonix/custom-cycle7-pcb
Custom pcb for the CYCLE7 by TKD with hotswap sockets and split space layout. It also features a decent mcu..



KiserDesigns/Monorail
Version 2 is based on the RP2040 and has encoder positions on ESC, 1, and 6.




TomasFilipCZ/PS4-USB-HEN-ESP32
ESP32-S2 as USB Flash disk emulation for loading GoldHEN for 9.00

ScatteredDrifter/Clacky40
Daisy40 drop-in replacement PCB, NOW with RP2040 and some additional features
It measures 347.7 × 94.2 mm and has 2 copper layers, 1.6 mm thick.
177 parts, built around the SRV05-4 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zegonix/custom-cycle7-pcb repository on GitHub, at the commit this page was made from: the board is cycle-7/cycle-7.kicad_pcb and its schematic cycle-7/cycle-7.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).