Skip to the content
2 layers100 × 100 mmConnect game, the printed circuit board in 3D

Connect Game

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
51
Pads
152
Tracks, vias
157, 4
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
8 May 2026
Updated
8 May 2026

Overview

Connect game is an open-source printed circuit board by zdenekru, from the zdenekru/connect-game repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 37 parts on 51 nets, routed with 157 tracks and 4 vias.

It is built around the BC547. Its parts include 13 connectors, 12 resistors, 4 capacitors, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Multi-Mode Wire Connection Game

A fun, interactive electronics game based on Arduino Nano. Players must connect the correct GPIO pins using jumper wires based on instructions or clues to reveal a secret code.

🕹️ Game Modes

The device supports two distinct gameplay modes:

1. Speed Connection (Single Wire)

  • Objective: Connect a single wire between two random points as fast as possible.
  • Gameplay: The OLED display shows two GPIO labels (e.g., L1 and P4). The player has a limited time to make the connection. Once successful, a new random pair is displayed.
  • Victory: Complete a predefined number of connections within the time limit to reveal the Secret Code.

2. Logic Puzzle (Multi-Wire)

  • Objective: Correctly wire the entire patch panel based on external clues.
  • Gameplay: The player must figure out the correct configuration (found elsewhere in the room or game). As the player connects the right wires, the display updates with progress (e.g., "1. OK", "2. OK").
  • Victory: Once all wires are correctly placed, the display shows the SECRET message and the final code.

🛠️ Hardware & PCB

This repository includes full KiCad design files and Gerber data for the custom PCB.

Key Components:

  • Controller: Arduino Nano v3.x
  • Display: 1.54" OLED (SSD1309) via I2C
  • I/O Expansion: AW9523B GPIO Expander
  • Power: LM2596 Step-Down module
  • Interface: Panel-mounted buttons, LED indicators, and 16x output terminals.

📋 Bill of Materials (BOM)

Full list of components can be found in the BOM.md file in the root directory.

🚀 Installation & Setup

  1. Hardware: Use the .kicad_pcb and .kicad_sch files or the provided Gerbers in /gerber_files for manufacturing.
  2. Libraries: Install U8g2 and Wire libraries in your Arduino IDE.
  3. Upload: Open the sketch from the /code folder and upload it to your Arduino Nano.

📂 Project Structure

  • /code - Arduino source code (.ino)
  • BOM.md - Detailed Bill of Materials
  • connect-game.kicad_pro/sch/pcb - Main KiCad project files
  • /gerber_files - Ready-to-use manufacturing data
  • /ArdinonanoCadFiles - Reference CAD models for the Nano
  • .gitignore - Configured to ignore .history and backups

Parts

37
QtyValueFootprintReferences
1010kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3, R4, R5, R6, R7, R8, R9, R10, R12
4MountingHoleMountingHole:MountingHole_5.3mm_M5H1, H2, H3, H4
3100nFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C3, C4
3Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ3, J15, J16
2Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ5, J6
2Conn_01x10_SocketConnector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ1, J2
2Screw_Terminal_01x08TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_HorizontalJ18, J19
1100uFCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC2
1180RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11
1Arduino_Nano_v3.xndoemcu:Arduino_Nano_WithMountingHolesA1
1BC547Package_TO_SOT_THT:TO-92_InlineQ1
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ17
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ13
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4
1Conn_01x12_SocketConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalJ14
1LOGOLOGOG***
1YAAJ_DCDC_StepDown_LM2596ndoemcu:YAAJ_DCDC_StepDown_LM2596U1

Similar boards

  • 2 layers83.3 × 65.3 mmSimonShield, the printed circuit board in 3D

    SimonShield

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    46 parts14kMIT
  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers99.1 × 99.7 mmRC6502 General Video Adapter, the printed circuit board in 3D

    RC6502 General Video Adapter

    tebl/RC6502-Apple-1-Replica

    An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

    80 parts193GPL-3.0
  • 2 layers55.9 × 38.6 mmMega Amp, the printed circuit board in 3D

    Mega Amp

    theacodes/genesynth

    A Sega Genesis inspired synthesizer

    40 parts178Apache-2.0
  • 2 layers40 × 100 mmBack pcb, the printed circuit board in 3D

    Back pcb

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    118 parts148GPL-3.0
  • 2 layers100 × 100 mmCANBuster, the printed circuit board in 3D

    CANBuster

    GBert/misc

    miscellaneous stuff / unsorted

    182 parts99

Questions

How big is the Connect game PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Connect game use?

37 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Connect game KiCad files?

From the zdenekru/connect-game repository on GitHub, at the commit this page was made from: the board is connect-game.kicad_pcb and its schematic connect-game.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Connect game design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).