
Power atiny v2
fijam/md-lpm
This project consists of hardware files and software for a coin-battery operated laser tester that fits in a MiniDisk case.

portfoli-o-zach-fredin
Fatiguetester is an open-source printed circuit board by zakqwy, from the zakqwy/zakqwy.github.io repository on GitHub. It is a 2-layer board of 36 × 66 mm with 20 parts on 17 nets, routed with 61 tracks and 0 vias.
It is built around the ATTINY412-SSN. Its parts include 6 capacitors, 5 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 47u | fab:fab_R_1206 | C5, C6, C7 |
| 2 | 1u | fab:fab_C_1206 | C1, C2 |
| 1 | 0u1 | fab:fab_C_1206 | C4 |
| 1 | 1k | fab:fab_R_1206 | R2 |
| 1 | 4k99 | fab:fab_R_1206 | R4 |
| 1 | ATtiny412-SS | fab:fab_IC_SOIC8 | U2 |
| 1 | Conn_01x02 | fatiguetester:CONN_DCJACK_2-4mm | J4 |
| 1 | Conn_01x02 | Connector_BarrelJack:BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J2 |
| 1 | Conn_01x03_Male | fatiguetester:CONN_SERVO_SMT | J1 |
| 1 | LED | fab:fab_LED_1206 | D1 |
| 1 | LM3480-5.0 | fab:fab_SMD_SOT23 | U1 |
| 1 | prog | fab:fab_CONN_1x06_SMD | J5 |
| 1 | ser_out | fab:fab_CONN_1x06_SMD | J3 |
The 16 most common of 20 parts.

fijam/md-lpm
This project consists of hardware files and software for a coin-battery operated laser tester that fits in a MiniDisk case.


Fab-Lab-Island/fli-bootcamp-2025
About Fab Lab ísland bootcamp Húsavík 2025. Kíkið á síðuna fyrir neðan!

Brasseur2robot/Les-brasseurs-d-idees
Codebase de l'équipe légende des brasseurs d'idées concourant à la coupe de France de robotique. Vous pouvez y retrouver les différents fichiers utilisés pour la création et le fonctionnement de notre robot principal et…

SreeniEadara/Hopkins-iGEM-2022-electrical
Schematics and PCB designs for Hopkins iGEM 2022

user-will/cursedPCB
A quick start guide and related files for the Cursed PCB by Reil Industrial


carmisergio/denon-preout-mod
PCB designs and firmware for the Denon AVR-X1300W Pre-out mod
It measures 36 × 66 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the ATTINY412-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zakqwy/zakqwy.github.io repository on GitHub, at the commit this page was made from: the board is projects/3rr-cpm/cad/fatiguetester/fatiguetester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zakqwy before reusing the design.