2 layers75 × 55 mm
2 layers79 × 79 mm
Plant monitoring device
zaitldav/AutoGardener1Device for autonomous watering of my plants.
- Size
- 79 × 79 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 67
- Pads
- 224
- Tracks, vias
- 361, 168
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Apr 2019
- Updated
- 17 Nov 2019
Overview
Plant monitoring device is an open-source printed circuit board by zaitldav, from the zaitldav/AutoGardener repository on GitHub. It is a 2-layer board of 79 × 79 mm with 74 parts on 67 nets, routed with 361 tracks and 168 vias.
It is built around the ESP32-WROOM-32, AOZ1280CI and IRLML6346TRPBF, with the S3B-ZR, MBR230LSFT1G and PPS1045-3G among its other parts. Its parts include 28 resistors, 15 connectors, 10 capacitors, 8 transistors and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
6
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AOZ1280CI
SOT-23-6-40℃~+85℃ 1 1.2A 1.5MHz 1mA 3V~26V 800mV~26V Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type SOT-23-6 DC-DC Converters ROHSAlpha & Omega SemiconductorDC-DC Converters
IRLML6346TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 2.9nC@4.5V 21pF 270pF 3.4A 30V 63mΩ@4.5V SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsS3B-ZR
弯插,P=1.5mmWire To Board ConnectorJST
MBR230LSFT1G
SOD-123FL-55℃~+125℃ 1 Independent 1mA@30V 2A 400mV 40A 40V SOD-123FL Schottky Diodes ROHSTokmasSchottky DiodesPPS1045-3G
TO-277-3-50℃~+150℃ 1 Independent 10A 200uA@45V 260A 45V 490mV@10A TO-277-3 Schottky Diodes ROHSDIOTECSchottky Diodes
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | MRS_Passives:R0603 | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R15, R16, R17, R31 |
| 8 | 1k | MRS_Passives:R0603 | R19, R20, R21, R22, R23, R24, R25, R26 |
| 8 | A2501WR-2P1 | MRS_Connectors:A2501WR-2P1 | J3, J4, J5, J6, J7, J8, J9, J10 |
| 8 | IRLML6346TRPBF | MRS_SOT:SOT-23 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 4 | 1uF | MRS_Passives:C0603 | C11, C22, C32, C34 |
| 4 | Mounting_hole_unplated_3,2mm | MRS_Mechanical:Mounting_hole_unplated_3,2mm | H1, H2, H3, H4 |
| 4 | S3B-ZR | MRS_Connectors:S3B-ZR | J11, J12, J13, J14 |
| 3 | 10uF | MRS_Passives:C1210 | C21, C31, C33 |
| 3 | 150R | MRS_Passives:R0603 | R111, R112, R113 |
| 2 | 0.1uF | MRS_Passives:C0603 | C12, C41 |
| 1 | 10nF | MRS_Passives:C0603 | C35 |
| 1 | 15k8 | MRS_Passives:R0603 | R33 |
| 1 | 2.2uH | MRS_Passives:L1210 | L31 |
| 1 | 49k9 | MRS_Passives:R0603 | R32 |
| 1 | AOZ1280 | MRS_SOT:SOT-23-6 | U3 |
| 1 | Barrel_Jack | MRS_Connectors:BarrelJack_Horizontal | J1 |
| 1 | ESP32-WROOM | MRS_Communication:ESP32-WROOM | U1 |
| 1 | Header_1x6 | MRS_Connectors:Header_1x06_P2.54mm | J2 |
| 1 | MBR230LSFT1G | MRS_Diodes:SOD-123 | D31 |
| 1 | MCP3424-E_SL | MRS_SO:SOIC-14 | U2 |
| 1 | Mr_Gardener_Logo_Small | Logos:mrg_gardener_12mm | H111 |
| 1 | PPS1045-3G | MRS_TO:TO-277-3 | D1 |
| 1 | RF-W2SA50TS-A39R | MRS_Diodes:RF-W2SA50TS-A39R | LD1 |
| 1 | S2B-ZR | MRS_Connectors:S2B-ZR | J15 |
| 1 | SHT31 | MRS_Sensors:SHT31 | U4 |
More from zaitldav/AutoGardener
2- 2 layers22 × 30 mm
Similar boards
- 2 layers79 × 79 mm
- 2 layers28 × 20 mm
Pot adapter board
veroxzik/sdvx-repo
Plans and part files for DIY and replica Sound Voltex controllers.
4 parts9GPL-3.0 - 2 layers68 × 78 mm
- 2 layers66 × 32 mm
- 2 layers60 × 111.3 mm
Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 4 layers59 × 101 mm
Enku mainboard r0.1
aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.
127 parts1CERN-OHL-W-2.0 - 4 layers54 × 94 mm
Enku mainboard r0.1
raznoglaz1y/enku
Open-source compact e-reader built around a 3.97″ e-paper display and ESP32-S3.
156 parts1Apache-2.0 - 4 layers220 × 130 mm
Gantry controller prototype DUE
kitspace-forks/growbox-open-motion-mobo
A general purpose open source Arduino DUE based motion controller designed to run the Synthetos G2 motion control fimware
138 parts
Questions
How big is the Plant monitoring device PCB?
It measures 79 × 79 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Plant monitoring device use?
74 parts, built around the ESP32-WROOM-32, AOZ1280CI, IRLML6346TRPBF and S3B-ZR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Plant monitoring device KiCad files?
From the zaitldav/AutoGardener repository on GitHub, at the commit this page was made from: the board is Indoor_Version/Hardware/Plant_monitoring_device.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Plant monitoring device design in my own project?
Its repository states no licence, so its author keeps all rights: ask zaitldav before reusing the design.