Skip to the content
4 layers100 × 91.4 mmPNP, the printed circuit board in 3D
Size
100 × 91.4 mm
Copper layers
4
Thickness
1.62 mm
Parts
39
Nets
87
Pads
238
Tracks, vias
366, 58
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Oct 2026
Updated
26 Oct 2026

Overview

PNP is an open-source printed circuit board by zachariahsharma, from the zachariahsharma/PNP repository on GitHub. It is a 4-layer board of 100 × 91.4 mm with 39 parts on 87 nets, routed with 366 tracks and 58 vias.

It is built around the ESP32-S3-DEVKITC-1-N8 and IRLZ44N. Its parts include 10 connectors, 8 ICs, 7 resistors, 6 capacitors and 2 diodes. It belongs with the ESP32 boards of this library.

Main components

2

Parts

39
QtyValueFootprintReferences
6100uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1, C2, C3, C4, C5, C6
6Conn_01x04_SocketConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ1, J2, J3, J5, J6, J7
6~Footprints:TMC2209 V1.3U3, U4, U5, U7, U8, U9
4MountingHoleMountingHole:MountingHole_4.3mm_M4H1, H2, H3, H4
3Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ8, J9, J10
2100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5, R12
210KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9, R13
21KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R3
21N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
2IRLZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q3
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1Conn_01x06_SocketConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ4
1ESP32-S3-DevKitCFootprints:ESP32-S3-DevKitCU1
1~Footprints:Mini MP1584EN Buck Converter ModuleU2

More from zachariahsharma/PNP

2

Similar boards

  • 2 layersKlipper mcu, the printed circuit board in 3D

    Klipper mcu

    Kishna-Jain/Delarion

    A custom 3 axis 3d printer

    37 parts1
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers129.9 × 63.6 mmTraeger rev 2.3.0.kicad pro, the printed circuit board in 3D

    Traeger rev 2.3.0.kicad pro

    jazzmonger/Traeger-PID-Controller

    Traeger Smoker/Grill Controller based on an

    45 parts36
  • 2 layers168.8 × 78.9 mmGameboy3, the printed circuit board in 3D

    Gameboy3

    ohasanov-hbrw/tribit32-advanced

    A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!

    61 parts8
  • 2 layers134.6 × 49.5 mmMem esp, the printed circuit board in 3D

    Mem esp

    fread/visvitalis

    A very simple modular relay computer

    71 parts7
  • 2 layers90 × 102 mmPL Toon, the printed circuit board in 3D

    PL Toon

    pl-toon/pl-toon-codes

    PL-TOON material

    39 parts7
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6
  • 2 layers76.2 × 40.6 mmEspressifESP32toExpressAdaptor, the printed circuit board in 3D

    EspressifESP32toExpressAdaptor

    dnhutchins/ETC_Express_Reverse_Eng

    The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.

    3 parts5

Questions

How big is the PNP PCB?

It measures 100 × 91.4 mm and has 4 copper layers, 1.62 mm thick.

What parts does the PNP use?

39 parts, built around the ESP32-S3-DEVKITC-1-N8 and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PNP KiCad files?

From the zachariahsharma/PNP repository on GitHub, at the commit this page was made from: the board is PNP.kicad_pcb and its schematic 3.3V_Circuit/3.3V_Circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PNP design in my own project?

Its repository states no licence, so its author keeps all rights: ask zachariahsharma before reusing the design.