

XIAO nRF54l15
- Size
- 21 × 17.8 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 88
- Pads
- 362
- Tracks, vias
- 811, 281
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Apr 2026
- Updated
- 7 Apr 2026
Overview
XIAO nRF54l15 is an open-source printed circuit board by yuxiangcheng2002, from the yuxiangcheng2002/KiCad-lib-ref repository on GitHub. It is a 6-layer board of 21 × 17.8 mm with 102 parts on 88 nets, routed with 811 tracks and 281 vias.
It is built around the FM8625H, TPS628438YKAR and TPS22916CYFPR, with the LSM6DS3TR-C, MSM261DGT006 and SGM2040-3.3YUDH4G/TR among its other parts. Its parts include 29 capacitors, 20 resistors, 12 ICs, 6 inductors and 4 diodes. It belongs with the nRF52 and nRF5x and SAM D and SAM boards of this library.
Main components
12FM8625H
DFN-6(0.7x1.1)-40℃~+90℃ 0.45dB 1.62V~3.3V 100MHz~6GHz 30dB 38dBm Integrated control logic SPDT DFN-6(0.7x1.1) RF Switches ROHSShenzhen Fuman ElecRF SwitchesTPS628438YKAR
DSBGA-6(0.6x1)-40℃~+125℃ 1 1.5MHz 1.8V~3.6V 1.8V~5.5V 275nA 600mA Adjustable Buck Built-in Step-down type Yes DSBGA-6(0.6x1) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS22916CYFPR
DSBGA-4(0.7x0.7)-40℃~+85℃ 1 1V~5.5V 2A 60mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking DSBGA-4(0.7x0.7) Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesLSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersMSM261DGT006
LGA-6(2x4)LGA-6(2x4) SMT ROHSMEMSUncategorisedSGM2040-3.3YUDH4G/TR
UTDFN-4AL(1x1)-40℃~+85℃@(Ta) 1 1uA 250mA 3.3V 38dB@(217Hz) 7.5V 90mV@(100mA) Fixed Over Current Protection、Over Temperature Protection、Enable Positive UTDFN-4AL(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSG MicroVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSGM40567-4.2XG/TR
WLCSP-6-B(0.92x1.16)-40℃~+125℃ 1 2.7V~7.5V 4.2V 700mA WLCSP-6-B(0.92x1.16) Battery Management ROHSSG MicroBattery ManagementUM3301DA
DFN6(1.45x1.0)Translators, Level ShiftersUnion SemiconductorNRF54L15-CAAA-R
-- Lack of specifications ROHSNordic SemiconUncategorisedCC0201KRX5R6BB104
0201100nF 10V X5R ±10% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCC0201CRNPO9BN1R2
02011.2pF 50V NP0 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCC0201JRNPO9BN101
0201100pF 50V NP0 ±5% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor:C0201 | C1, C4, C7, C8, C12, C13, C22, C23, C24, C25, C26, C28 |
| 8 | Test Point | Misc:TP-D45MIL | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 8 | Test Point | Misc:TP-1.6MM-ROUND | TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 |
| 5 | 10K | Resistor:R0201 | R5, R6, R10, R12, R13 |
| 4 | 0R | Resistor:R0201 | R16, R17, R20, R21 |
| 4 | 1uF | Capacitor:C0201 | C2, C3, C5, C6 |
| 4 | Test Point | Misc:TP-80X40MIL | TP9, TP10, TP19, TP20 |
| 3 | 100K | Resistor:R0201 | R3, R7, R8 |
| 2 | 1.2pF | Capacitor:C0201 | C18, C19 |
| 2 | 100pF | Capacitor:C0201 | C27, C29 |
| 2 | 10uF | Capacitor:C0402 | C10, C11 |
| 2 | 2.2uF | Capacitor:C0201 | C14, C15 |
| 2 | 4.7K | Resistor:R0201 | R18, R19 |
| 2 | 4.7nH | Inductor:L0201 | L4, L6 |
| 2 | 5.1K | Resistor:R0201 | R1, R2 |
| 2 | TD-1183SN-A3N-D1R | Switch:BUTTON_TD1183SA | K1, K2 |
| 2 | TPS22916CYFPR | Ic:WLCSP4-0.4-0.77X0.77X0.33MM | U2, U11 |
| 1 | 1.5K | Resistor:R0201 | R15 |
| 1 | 10nF | Capacitor:C0201 | C16 |
| 1 | 120K | Resistor:R0201 | R4 |
| 1 | 120R | Inductor:L0201 | FB1 |
| 1 | 1pf | Capacitor:C0201 | C31 |
| 1 | 1uH | Inductor:L0603 | L1 |
| 1 | 249K | Resistor:R0201 | R9 |
| 1 | 2K | Resistor:R0201 | R14 |
| 1 | 2nH | Inductor:L0201 | L5 |
| 1 | 3.6nH | Inductor:L0201 | L3 |
| 1 | 3.9pf | Capacitor:C0201 | C17 |
| 1 | 32.768KHz | Crystal:X2-SMD-1.6X1.0MM | X2 |
| 1 | 32MHz-8pF-10ppm-70R | Crystal:X4-SMD-1.6X1.2MM | X1 |
| 1 | 4.7uF | Capacitor:C0402 | C9 |
| 1 | 4.7uH | Inductor:L0603 | L2 |
| 1 | ATSAMD11D14A-UUT | Ic:WLCSP20-0.4-2.4X1.9X0.5MM_SMALL | U4 |
| 1 | DF2B7ASL,L3F | Diode:ESD-0201 | D1 |
| 1 | ECT818000500 | Connector:IPEX-GEN4-SMD-1.7X1.7X1.0MM | ANT2 |
| 1 | FM8625H | Ic:DFN6-0.4-1.1X0.7X0.45MM | U10 |
| 1 | Green | Diode:LED-0402 | D3 |
| 1 | KH5220-A36 | Misc:ANT2P-5.2x2x1.1MM | ANT1 |
| 1 | LN237N3T5G | Mosfet:PMOS_1.0X0.6X0.35MM | Q2 |
| 1 | LP0404N3T5G | Mosfet:PMOS_1.0X0.6X0.35MM | Q1 |
| 1 | LSM6DS3TR-C | Ic:LGA14-0.5-2.5X3X0.86MM | U7 |
| 1 | MSM261DGT006 | Misc:MIC6P-0.94-4X2X1.1MM | U8 |
| 1 | PSBD2FD40V1H | Diode:DFN1006-2L | D4 |
| 1 | Red | Diode:LED-0402 | D2 |
| 1 | SGM2040-3.3YUDH4G/TR | Ic:X2SON4-0.625-1x1x0.6mm | U3 |
| 1 | SGM40567-4.2XG/TR | Ic:WLCSP-0.4-0.92X1.16X0.4MM | U1 |
| 1 | TPS628438YKAR | Ic:BGA6-0.35-0.85X1.2X0.4MM | U5 |
| 1 | UM3301DA | Ic:DFN6-0.5-1.45X1X0.6 | U12 |
| 1 | USB2.0 Type C | Connector:USB2.0-TYPE-C_USB-31C-F-16P | USB1 |
| 1 | VALUE | Capacitor:C0201 | C20 |
| 1 | XIAO Pin | Module:MOUDLE14P-XIAO-HALF-HOLE-PRO | U9 |
| 1 | nRF54L15-CAAA-R | Ic:WLCSP47-0.3-2.451X2.245X0.42MM | U6 |
The 101 most common of 102 parts.
More from yuxiangcheng2002/KiCad-lib-ref
2- 4 layers14.1 × 11.2 mm

- 4 layers41 × 12.4 mm

Similar boards
- 4 layers21 × 17.8 mm

XIAO ESP32 C6
MitkoDyakov/Calipatron
I design my own digital caliper based on STM32F103C8T6 blue pill.
83 parts47MIT - 4 layers30 × 30 mm

ReCamera 2002 S4 GC2053 Sensor Board V1.0 SCH&PCB 250905
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
83 parts495Apache-2.0 - 6 layers15.2 × 34 mm

Plajtime main
Plajta/PlajTime-Hardware
Here lays the current and past HW designs of our PlajTime smartwatch. That includes all the boards and the chassis.
85 parts3CC-BY-SA-4.0 - 4 layers21 × 17.8 mm

- 6 layers17.8 × 21.1 mm

- 4 layers21 × 17.8 mm

XIAO RA4M1
yuxiangcheng2002/stm32c5-xiao-cf
XIAO form-factor (20×17.5mm) CAN-FD node board based on STM32C542.
84 parts - 4 layers78 × 59 mm

- 4 layers40 × 25 mm

ESP32-C6FH4
vk-sahni/ESP32C6-CAN
ESP32-C6 CAN telemetry gateway for ArduPilot/DroneCAN — captures CAN data and forwards flight telemetry to cloud services over Wi-Fi/Internet, with local MicroSD logging and buffering.
61 parts
Questions
How big is the XIAO nRF54l15 PCB?
It measures 21 × 17.8 mm and has 6 copper layers, 1.6 mm thick.
What parts does the XIAO nRF54l15 use?
102 parts, built around the FM8625H, TPS628438YKAR, TPS22916CYFPR and LSM6DS3TR-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XIAO nRF54l15 KiCad files?
From the yuxiangcheng2002/KiCad-lib-ref repository on GitHub, at the commit this page was made from: the board is MCU/nRF54L15_KICAD/XIAO nRF54l15.kicad_pcb and its schematic ANNA_B402_00B/references/ZSWatch_legacy_anna_nrf52833/ZSWatch-kicad-v2/ZSWatch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the XIAO nRF54l15 design in my own project?
Its repository states no licence, so its author keeps all rights: ask yuxiangcheng2002 before reusing the design.