
RTSS Power Supply V2-5C
RadioThermal/RadioThermal_Soldering_OSHW
Open Source Hardware 470KHz Induction Soldering Iron

独自に定義したピン定義のPCIeでのテープLED駆動用回路
Tape LED Blinky is an open-source printed circuit board by yutotnh, from the yutotnh/Dual_Tape-LED_Driver repository on GitHub, published under the MIT licence. It is a 2-layer board of 84.3 × 50 mm with 18 parts on 26 nets, routed with 52 tracks and 49 vias.
It is built around the L7812. Its parts include 8 resistors, 3 ICs, 3 connectors, 2 diodes and 2 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R7, R8 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R6 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 2 | LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1, D2 |
| 2 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U4 |
| 2 | Q_NJFET_GDS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | Bus_mechaken_PCIexpress_x16_164_Position | PCIe:BUS_mechaken_PCIexpress_x16 | J2 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |

RadioThermal/RadioThermal_Soldering_OSHW
Open Source Hardware 470KHz Induction Soldering Iron


profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.



kholia/Global-Communications-Transceiver
Open-source files for Global Communications Transceiver

oe2lsp/miniWhip
miniWhip Antenna, E-Field Antenna, capacitive antenna, DXLwhip, DXL-miniWhip, DXLminiWhip

gongminmin/ImpulseDrive
A preliminary design of a plasma engine for spacecraft propulsion
It measures 84.3 × 50 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the L7812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yutotnh/Dual_Tape-LED_Driver repository on GitHub, at the commit this page was made from: the board is Tape-LED_Blinky.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).