

Mini rp2040 devboard
rp-2040 devboard in small form factor
- Size
- 32.3 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 61
- Pads
- 258
- Tracks, vias
- 763, 65
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Sep 2026
- Updated
- 10 Sep 2026
Overview
Mini rp2040 devboard is an open-source printed circuit board by yutish3, from the yutish3/RP-2040-devboard-Mini- repository on GitHub. It is a 2-layer board of 32.3 × 59.7 mm with 36 parts on 61 nets, routed with 763 tracks and 65 vias.
It is built around the RP2040, HC-05 and W25Q32JVSSIQ, with the USBLC6-2P6 among its other parts. Its parts include 15 capacitors, 8 resistors, 5 connectors, 4 ICs and 2 switches. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)HC-05
Bluetooth to Serial Port ModuleGENERICUncategorisedW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdABOUT
rp-2040 dev board in small form factor of 3cm x 6cm made in kicad
it has :- 2 x 20 pin connectors , separate headers for HC - 05 Bluetooth module , extra 4Mb flash memory , USB c port , 2 buttons for BOOT and Reset and TC2030 connector for programming without usb c
IMAGES
SCHEMATICS
FOOTPRINTS
PCB
RENDER
Initially i tried to make it black but it changed color to smth random and it looks way cooler now
FILES
/Production folder has all the production files
/PCB files has all the pcb project files in it
CREDITS
Kicad
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 nF | Capacitor_SMD:C_0201_0603Metric | C5, C6, C7, C8, C9, C10, C11, C12 |
| 2 | 10uF | Capacitor_SMD:C_0201_0603Metric | C1, C2 |
| 2 | 15p | Capacitor_SMD:C_0201_0603Metric | C13, C14 |
| 2 | 1K | Resistor_SMD:R_0201_0603Metric | R3, R4 |
| 2 | 1uF | Capacitor_SMD:C_0201_0603Metric | C3, C4 |
| 2 | 27 | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | 5.1K | Resistor_SMD:R_0201_0603Metric | R6, R7 |
| 1 | 100nF | Capacitor_SMD:C_0201_0603Metric | C15 |
| 1 | 10K | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | 330 | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | GPIO HEADERS - 1 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J5 |
| 1 | GPIO HEADERS - 2 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J6 |
| 1 | HC-05 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SWD | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
Similar boards
- 4 layers61 × 26 mm

- 4 layers40.1 × 82.8 mm

FlightPCB
Shubhamai/tsar
General-purpose & fully programmable flight computer PCB desgined in KiCad EDA
143 parts - 4 layers83 × 106 mm

- 2 layers25.7 × 67.6 mm

- 4 layers96 × 60 mm

Sensor Node
souptik-samanta/Sensor-Node
A compact environmental monitoring node built around the STM32L052 microcontroller. The board measures temperature, humidity, while providing onboard storage and support for external SX1262 LoRa modules.
59 parts1 - 4 layers92.4 × 56.8 mm

STM32 IOT project
pdaslabs08/ESP32-and-IOT_Project1
Custom 4-layer ESP32 IoT PCB designed in KiCad with complete schematic, PCB layout, and manufacturing-ready files.
87 parts - 2 layers78 × 60 mm

- 4 layers22.9 × 61 mm

Questions
How big is the Mini rp2040 devboard PCB?
It measures 32.3 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mini rp2040 devboard use?
36 parts, built around the RP2040, HC-05, W25Q32JVSSIQ and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mini rp2040 devboard KiCad files?
From the yutish3/RP-2040-devboard-Mini- repository on GitHub, at the commit this page was made from: the board is PCB files/mini rp2040 devboard.kicad_pcb and its schematic PCB files/mini rp2040 devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mini rp2040 devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask yutish3 before reusing the design.