2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47
2 layers98.6 × 59.9 mm
FCS ROV
yusufElnady/FCS-ROVThis repository includes the code (top and bottom-side) and the PCB design for the ROV made for students in the faculty of CS, Alexandria University.
- Size
- 98.6 × 59.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 60
- Pads
- 205
- Tracks, vias
- 282, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 May 2024
- Updated
- 24 May 2024
Overview
FCS ROV is an open-source printed circuit board by yusufElnady, from the yusufElnady/FCS-ROV repository on GitHub. It is a 2-layer board of 98.6 × 59.9 mm with 57 parts on 60 nets, routed with 282 tracks and 19 vias.
It is built around the L7809 and SI2302DS. Its parts include 34 resistors, 14 transistors, 5 connectors, 2 capacitors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
L7809
TO-220-20℃~+125℃@(Tj) 1 1.5A 2V@(1.0A) 35V 58uV 5mA 66dB@(120Hz) 9V Fixed Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSPUOLOPVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SI2302DS
SOT-231 N-channel 1.5V 2.8A 20V 270pF 83mΩ@4.5V、120mΩ@2.5V 880pF 900mW N-Channel SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 200R | Resistor_SMD:R_0805_2012Metric | R1, R2, R4, R6, R9, R10, R11, R14, R17, R20, R23, R26, R29, R32 |
| 14 | SI2302DS | SI2302DS:SOT23-3_TO-236AB | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 10 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R8, R13, R16, R19, R22, R25, R28, R31, R34 |
| 10 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R7, R12, R15, R18, R21, R24, R27, R30, R33 |
| 3 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J2, J12, J14 |
| 2 | C | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J1 |
| 1 | L7809 | FQP30N06L:TO220V | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
Similar boards
- 2 layers47.6 × 69.1 mm
Pico Drone
TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.
33 parts29Apache-2.0 - 2 layers143 × 97 mm
Pihat all
yope/kamaq
Python/Cython implementation of 3D printer firmware running on Linux
305 parts11GPL-2.0 - 4 layers80 × 87.6 mm
AratMicro
vorlaxen-labs/AratMicro
High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).
110 parts1MIT - 2 layers88.9 × 89.9 mm
- 2 layers388 × 444 mm
- 2 layers70.2 × 70.2 mm
- 2 layers38 × 38 mm
125kHz RFID I2C board with easyC
SolderedElectronics/125kHz-RFID-I2C-board-qwiic-hardware-design
Hardware design, BOM, gerbers and 3D files for 125kHz-RFID-I2C-board-qwiic designed by Soldered Electronics.
104 parts
Questions
How big is the FCS ROV PCB?
It measures 98.6 × 59.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FCS ROV use?
57 parts, built around the L7809 and SI2302DS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FCS ROV KiCad files?
From the yusufElnady/FCS-ROV repository on GitHub, at the commit this page was made from: the board is main_board/main_board.kicad_pcb and its schematic main_board/main_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FCS ROV design in my own project?
Its repository states no licence, so its author keeps all rights: ask yusufElnady before reusing the design.