
ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

A Harry Potter-style physical chess board that moves pieces autonomously using an electromagnet on a CoreXY gantry.
Chess motor is an open-source printed circuit board by yplee948-hub, from the yplee948-hub/wizardchess repository on GitHub. It is a 2-layer board of 121 × 59.5 mm with 10 parts on 64 nets, routed with 129 tracks and 5 vias.
It is built around the TMC2209SILENTSTEPSTICK. Its parts include 4 connectors, 2 ICs and 1 switch. It belongs with the robots and motor control boards and the RP2040 boards of this library.
A Harry Potter-style physical chess board that moves pieces autonomously using an electromagnet on a CoreXY gantry. Players interact via voice command or a web UI — the board physically slides the pieces to match the move.
Browser (Next.js UI)
│
│ WebSocket (LAN)
▼
ESP32-S3 (control_firmware) ◄──── I2S Microphone (voice → Whisper)
│
│ UART @ 115200
▼
Raspberry Pi Pico (motor_firmware)
│
▼
CoreXY gantry + Electromagnetwizardchess/
├── motor_firmware/ # Raspberry Pi Pico — CoreXY motion + chess game logic
├── control_firmware/ # Seeed XIAO ESP32-S3 — voice + WebSocket bridge (ESP-NOW to motor)
├── UI/ # Next.js web UI + WebSocket broker (only copy — do not duplicate)
├── prints/ # KiCad PCB + gerbers (STLs on OneDrive)
└── README.md # This fileWeb UI: Use the
UI/folder only. If you download a separate “web interface” zip, merge intoUI/or replace it — do not add a second top-level copy.
| Component | Role |
|---|---|
| Raspberry Pi Pico (RP2040) | Motor control + game logic |
| Seeed XIAO ESP32-S3 | Voice recognition + Wi-Fi bridge |
| 2× Stepper motors (+ driver) | CoreXY X/Y motion |
| Electromagnet (H-bridge driven) | Piece pickup |
| ICS-43432 I2S microphone | Voice input |
| Custom motor PCB | Integrates Pico + drivers |
See the README in each subdirectory for full setup instructions:
motor_firmware/ — flash the Pico firstcontrol_firmware/ — flash the ESP32-S3 secondUI/ — run the web interface lastSTL models, resin slicer files (.ctb), KiCad PCB, laser cut SVGs, and Fusion 360 source files are stored on OneDrive (too large for git):
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 2 | Stepper_Motor_bipolar | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | M1, M2 |
| 2 | TMC2209_SILENTSTEPSTICK | TMC2209_SILENTSTEPSTICK:MODULE_TMC2209_SILENTSTEPSTICK | U1, U2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |

Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode


harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp



Angelo13C/3d-printer
Firmware, electronics, mechanics and control interface of a 3D printer

ItsRebaseTime/turbomansion
Hello, welcome to the turbomansion repository.
It measures 121 × 59.5 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the TMC2209SILENTSTEPSTICK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yplee948-hub/wizardchess repository on GitHub, at the commit this page was made from: the board is prints/Chess_motor_pcb/Chess_motor.kicad_pcb and its schematic prints/Chess_motor_pcb/Chess_motor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask yplee948-hub before reusing the design.