YoussefAymanJo/RamsisRamsis is an open-source printed circuit board by YoussefAymanJo, from the YoussefAymanJo/Ramsis repository on GitHub. It is a 2-layer board of 113.5 × 86.5 mm with 14 parts on 51 nets, routed with 87 tracks and 1 via.
It is built around the ESP32-S3-DEVKITC-1-N8R2. Its parts include 6 connectors, 3 ICs, 1 resistor, 1 diode and 1 switch. It belongs with the ESP32 boards of this library.
Desk Robot, your daily companion, can answer any question you ask about weather, news, or even songs. it powered by ESP32 S3. and has lovely face interact with you
Actually,i feel boring and uncomfortable on my studying and working hours on my study or on pc.so,i made this robot to be ai companion for me. Interact with my emotiions and answer my questions.this robot mainly for entertainment and rapid helper companion in any quetion look like Jarvis.
first, fabricate and print pcb,then print 3d models,and wire circuit and test it.then assemlbe all together and test again.
I made a schematic for my keyboard, and sketch simpled diagram for schematic.
I outlined shape first,the routed the pcb and added 3d models
Wiring Diagram :
I started sketching the enclosure based on the PCB, then made the top cover, added openings, and assembled.
i will us this for firmware https://github.com/78/xiaozhi-esp32 and https://github.com/EDISON-SCIENCE-CORNER/AI-CHAT-BOT/tree/main/3D%20FILES while editing the code while building.
I made the BOM and needed materials ,in egypt then convert its price to USD dollar.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J1, J3, J4 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J5, J6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2 |
| 1 | ESP32-S3-DEVKITC-1-N8R2 | Library:esp32 s55 | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | Resistor | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | TP4056_MICRO-USB_CHARGER_-_1A | Library:MODULE_TP4056_MICRO-USB_CHARGER_-_1A | U2 |
| 1 | adafruit-MAX98357 | max555:adafruit-MAX98357 | U3 |
It measures 113.5 × 86.5 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the ESP32-S3-DEVKITC-1-N8R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the YoussefAymanJo/Ramsis repository on GitHub, at the commit this page was made from: the board is Ramsis/Ramsis.kicad_pcb and its schematic Ramsis/Ramsis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask YoussefAymanJo before reusing the design.
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
riezky-gitH/SIMPAS-BOILER
> 📖 Guidebook proyek — tautan guidebook baru akan ditambahkan di sini.
arkadasgupta07/ProjectKratos
Arka Dasgupta BITS Pilani, K. K. Birla Goa Campus Aspiring to develop rovers by engineering their electronics, controls and automation subsystems.
dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.
Sidbit08/ABEX_PCB_v1
A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.
stevfu/eis_capstone
Utilization of Electrochemical Impedance Spectroscopy for the Detection of Drugs