

Homedeck
A 7" wall-mounted Home Assistant touchscreen that shows your home at a glance and wakes when you walk up.
- Size
- 60 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 16
- Pads
- 61
- Tracks, vias
- 139, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 31 Oct 2026
Overview
Homedeck is an open-source printed circuit board by Yourm5m5, from the Yourm5m5/Homedeck repository on GitHub. It is a 2-layer board of 60 × 45 mm with 21 parts on 16 nets, routed with 139 tracks and 15 vias.
It is built around the MMBT3904 and SMAJ5.0CA. Its parts include 7 connectors, 4 resistors, 2 capacitors, 1 diode and 1 transistor. It belongs with the home automation and IoT boards of this library.
Main components
2MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SMAJ5.0CA
DO-214AC(SMA)-65℃~+150℃ 400W 43.5A 5V 6.4V 800uA 9.2V Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
README
README.mdHomeDeck
A 7" desk touchscreen for Home Assistant that shows your home at a glance and wakes up when you walk over.
What is HomeDeck?
HomeDeck is a 7" smart display that sits on a desk or bench and connects to Home Assistant over Wi-Fi. At a glance it shows the time, weather, calendar, energy use, and whether doors or windows are open. One tap controls lights, fans, air-con, scenes and music.
It's built around a Sunton ESP32-S3 7" touchscreen board, plus a custom add-on PCB I designed in KiCad. The add-on board provides protected USB-C power and three sensors:
- LD2410C mmWave radar notices when someone is in front of the panel (even sitting still) and wakes the screen
- BH1750 light sensor dims the screen automatically in a dark room
- SHT40 reads room temperature and humidity and reports them back to Home Assistant
A small buzzer gives touch feedback and alerts. Everything sits in a 3D-printed enclosure I modelled in Fusion 360, tilted back 20° so it's easy to read and tap from a chair.
Why I built it
I use Home Assistant at home, but controlling anything means pulling out my phone, unlocking it and opening an app, which is often slower than walking to the light switch. I wanted something that's always on and always in the same place: glance to see what's going on, tap once to change it.
You can buy smart displays, but most are locked to one company's ecosystem, rely on the cloud, and can't be customized. HomeDeck runs locally through ESPHome and Home Assistant, so it keeps working without the internet and shows exactly what I want.
I also wanted a project that would teach me real hardware skills: drawing a schematic, routing a two-layer PCB, modelling a multi-part enclosure and writing firmware, rather than just plugging modules together.
Features
- 7" 800×480 capacitive touchscreen
- Controls lights, fans, AC, scenes and media through Home Assistant
- Shows time, weather, calendar, energy use and alerts
- Wakes automatically when someone walks up (mmWave presence)
- Auto-brightness from the ambient light sensor
- Reports room temperature and humidity to Home Assistant
- Buzzer for touch feedback, timers and doorbell alerts
- Fully local: ESPHome + LVGL, no cloud needed
- One USB-C cable for power
How it works
The Sunton board's ESP32-S3 drives the display and runs ESPHome with an LVGL interface. The display uses almost every GPIO, so my add-on PCB connects through the few left on the board's expansion headers:
| Signal | Part | ESP32 pin | Header |
|---|---|---|---|
| I2C SDA / SCL | SHT40 + BH1750 | GPIO19 / GPIO20 | P3 (shared with touch, no address conflicts) |
| UART RX / TX | LD2410C | GPIO44 / GPIO43 | P1 |
| Presence output | LD2410C | GPIO17 | P4 |
| Buzzer (via NPN transistor) | Piezo | GPIO18 | P4 |
| 5 V power in | USB-C | n/a | P1 |
Custom PCB
Designed in KiCad: a ~60 × 45 mm two-layer board with power traces on the front, signals on the back, ground fill on both sides and stitching vias. It passes DRC with 0 errors.
Power input: USB-C (5.1 kΩ CC resistors) → 2 A polyfuse → SMAJ5.0CA TVS diode → 10 µF + 100 nF decoupling.
Enclosure
Modelled in Fusion 360 as four 3D-printed parts:
- Front bezel holds the screen behind a 2 mm lip and has a sensor window at the top
- Back shell has vent slots so the SHT40 reads room air instead of screen heat
- Base (190 × 120 × 24 mm) holds the display at 20°, with space for the PCB inside
- Bottom plate mounts the add-on PCB on standoffs and has rubber feet underneath
Screen-related sizes are estimates and will be checked against the real Sunton board before the final print.
Bill of materials
All parts from AliExpress except the custom PCB, which comes from JLCPCB. Prices are approximate AUD and change with sales, exchange rates and shipping, so check the listing before ordering. Many small parts only come in packs, so you'll have spares.
Bill of materials
All parts are from AliExpress except the custom PCB, which comes from JLCPCB. Prices are approximate AUD and change with sales, exchange rates and shipping. Many small parts only come in packs, so you'll have spares. Where a listing has several options (value, size, pack size), pick the one in the Part column.
Electronics
| # | Part | Qty | Approx. AUD | Link |
|---|---|---|---|---|
| 1 | Sunton ESP32-8048S070C (7" 800×480, ESP32-S3, capacitive touch) | 1 | $70.00 | AliExpress |
| 2 | HLK-LD2410C 24 GHz mmWave presence sensor | 1 | $6.00 | AliExpress |
| 3 | SHT40 temperature/humidity breakout module | 1 | $4.50 | AliExpress |
| 4 | BH1750 (GY-302) light sensor module | 1 | $3.00 | AliExpress |
| 5 | Passive piezo buzzer 12 mm (pack of 10) | 1 pack | $3.00 | AliExpress |
| 6 | MMBT3904 NPN transistor, SOT-23 (pack of 100) | 1 pack | $2.50 | AliExpress |
| 7 | USB-C 6-pin power-only socket (pack of 10) | 1 pack | $3.00 | AliExpress |
| 8 | 2 A polyfuse, 1812 (pack of 20) | 1 pack | $3.00 | AliExpress |
| 9 | SMAJ5.0CA TVS diode (pack of 50) | 1 pack | $3.00 | AliExpress |
| 10 | 0805 resistor + capacitor sample kit | 1 kit | $8.00 | Resistors · Capacitors |
| 11 | 1.25 mm 4-pin connectors + pre-crimped cables | 1 set | $5.00 | AliExpress |
| 12 | 2.54 mm female header strips | 1 pack | $2.50 | AliExpress |
| 13 | Custom PCB, 5 pcs + shipping (JLCPCB) | 1 order | $18.00 | JLCPCB (upload the Gerbers in pcb/gerbers) |
| Electronics subtotal | $131.50 |
Enclosure
| # | Part | Qty | Approx. AUD | Link |
|---|---|---|---|---|
| 14 | PETG filament (~300 g of a 1 kg roll) | 1 | $8.00 | AliExpress |
| 15 | M3 brass heat-set inserts (pack of 50) | 1 pack | $7.00 | AliExpress |
| 16 | M3 screw assortment (M3×6, M3×16) | 1 kit | $8.00 | AliExpress |
| 17 | Self-adhesive rubber feet | 1 pack | $3.00 | AliExpress |
| Enclosure subtotal | $26.00 |
Power
| # | Part | Qty | Approx. AUD | Link |
|---|---|---|---|---|
| 18 | USB-C power supply, 5 V / 3 A (AU plug) | 1 | $10.00 | AliExpress |
| 19 | USB-C cable, 1 m | 1 | $4.00 | AliExpress |
| Power subtotal | $14.00 |
Total
| AUD | |
|---|---|
| Electronics | $131.50 |
| Enclosure | $26.00 |
| Power | $14.00 |
| Estimated total | ≈ $171.50 |
AliExpress listings change often. If a link stops working, search AliExpress for the exact part name in the table (e.g. "ESP32-8048S070C", "SMAJ5.0CA").
Acknowledgements
- Sunton pinout info from ESP3D and Blakadder's templates
- Built with KiCad, Fusion 360, ESPHome and Home Assistant
- AI assistance (Claude) was used for planning, guidance, diagrams and a reference enclosure model and code.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 2A | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | BH1750 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J6 |
| 1 | BUZZER | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | LD2410C | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J7 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SHT40 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | SMAJ5.0CA | Diode_SMD:D_SMA | D1 |
| 1 | Sunton P1 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J2 |
| 1 | Sunton P3 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J3 |
| 1 | Sunton P4 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J4 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
The 17 most common of 21 parts.
Similar boards
- 4 layers100 × 100 mm

- 4 layers74.9 × 243.5 mm

- 2 layers100 × 100 mm

Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
266 parts100 - 2 layers131.5 × 83.5 mm

Badge esp32-s3
BYU-I-eBadge/e-badge
A hackable eBadge platform for students — a customizable, programmable electronics badge designed for hands-on learning and creative exploration throughout their academic journey.
218 parts2MIT - 4 layers80 × 80 mm

- 4 layers78.5 × 91 mm

- 4 layers95 × 95 mm

ControlBoard
ParadigmEngineering/igvc-2023-hardware
Intelligent Ground Vehicle Competition (Spring 2023) hardware for the Paradigm Engineering Student Group
175 parts1 - 4 layers71 × 64 mm

UWB
victorstoica114/UWB_Module_ESP_IDF
ESP-IDF 6.0.2 firmware for the custom UWB Module V1.0 Rev.B, based on an ESP32-S3-WROOM-1-N16R8. The same application image runs on every module; persistent identity and runtime configuration select the role and active…
254 parts1
Questions
How big is the Homedeck PCB?
It measures 60 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Homedeck use?
21 parts, built around the MMBT3904 and SMAJ5.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Homedeck KiCad files?
From the Yourm5m5/Homedeck repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Homedeck design in my own project?
Its repository states no licence, so its author keeps all rights: ask Yourm5m5 before reusing the design.