
Panel
da-penguin-guy/Proteus
The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol

6115-final project is an open-source printed circuit board by yohandev, from the yohandev/6115-final-project repository on GitHub. It is a 2-layer board of 127 × 65 mm with 13 parts on 72 nets, routed with 167 tracks and 0 vias.
It is built around the RP2040, COM-09032 and B3F-4055. Its parts include 5 resistors, 3 ICs, 2 switches, 1 diode and 1 connector. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2.2kΩ | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | 3.3kΩ | Resistor_SMD:R_1206_3216Metric | R5, R6 |
| 2 | B3F-4055 | B3F-4055:SW_B3F-4055 | S1, S2 |
| 1 | 110Ω | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | COM-09032 | COM_09032:XDCR_COM-09032 | U1 |
| 1 | CY8CKIT-059 | CY8C58LP:MODULE_CY8CKIT-059 | U2 |
| 1 | Diode | fab:SOD-123 | D1 |
| 1 | RP2040 | fab:SeeedStudio_XIAO_RP2040 | M1 |
| 1 | SWD | fab:PinHeader_1x03_P2.54mm_Vertical_THT_D1mm | J1 |
| 1 | ~ | Display:ST7735 | U4 |

da-penguin-guy/Proteus
The Proteus is a modular collection of PCBs that will be used to develop the Virgil sound Protocol

walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.

PubInv/krake
The Krake™ is a Wi-Fi–enabled server using an MQTT broker, which means it can be controlled remotely by other devices ("clients") via the internet.

PubInv/general-purpose-alarm-device
A general purpose alarm device (with software) as a module for medical devices (and others)


PaulBichl/VibePCB-bench-psu
USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.

Pegoku/Home-Assistant-Control-pad
This is a programmable Home Assistant Control Pad. It can control 4 Home assistant devices at a time, and has 4 togglable screens/zones (in total 16 devices).

anh-phi-dao/DATN_Nhung_Firmware_Raspberrypi
abovecam=VisionESP32("http://192.168.137.235/capture","stockv19.pt","oosv12.pt",0.75,0.6,"Shelf1,22 detection","Shelf1,22 outofstock")…
It measures 127 × 65 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the RP2040, COM-09032 and B3F-4055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yohandev/6115-final-project repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask yohandev before reusing the design.