
Sar pager
KingCountySAR/iot-beepers
Bringing back our favorite pager alarms for those late night callouts

This is a 32 (23333+2) key wireless keyboard featuring:
Whiplaesh is an open-source printed circuit board by ykz89, from the ykz89/Whiplaesh repository on GitHub. It is a 2-layer board of 257 × 106.1 mm with 88 parts on 80 nets, routed with 1,276 tracks and 95 vias.
It is built around the 1N4148W and OS102011MA1QN1. Its parts include 32 diodes and 32 switches.
Inspired by Aespa's latest single 'Whiplash'.
This is a 32 (23333+2) key wireless keyboard featuring:
Todo
Todo
Todo
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16 |
| 32 | SW_PUSH | fingerpunch:gateron-ks27-choc-v1-mx-soldered-and-hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +16 |
| 8 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 2 | JST_PH | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | JST1, JST2 |
| 2 | LOGO | library:Aespa | G***, G*** |
| 2 | OS102011MA1QN1 | footprints:OS102011MA1QN1_CNK | PWR1, PWR2 |
| 2 | SW_PUSH | footprints:SW_SKHLACA010_ALPS | RST1, RST2 |
| 2 | VAL** | library:mouse-bite-5mm-slot | mouse-bite-5mm-slot, mouse-bite-5mm-slot |
| 2 | ~ | vik:vik-keyboard-connector-horizontal | VIK_OUT1, VIK_OUT2 |
| 2 | ~ | library:ArduinoProMicro | MCU1, MCU2 |
The 86 most common of 88 parts.

KingCountySAR/iot-beepers
Bringing back our favorite pager alarms for those late night callouts

hasenbanck/remram
32bit STM32F7 based 3D printing controller using TMC2130 stepper driver

ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!

porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike


leeyumsk/IRL-Subtitles
Using techniques similar to human perception to localize sounds and speakers.

axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

It measures 257 × 106.1 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the 1N4148W and OS102011MA1QN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ykz89/Whiplaesh repository on GitHub, at the commit this page was made from: the board is kicad/Whiplaesh.kicad_pcb and its schematic kicad/Whiplaesh.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ykz89 before reusing the design.