2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers101.6 × 53.3 mm
ArduinoMegaShield
ykbl27/ArduinoMegaShieldPCB- Size
- 101.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 107
- Pads
- 207
- Tracks, vias
- 244, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 May 2024
- Updated
- 24 Jun 2024
Overview
ArduinoMegaShield is an open-source printed circuit board by ykbl27, from the ykbl27/ArduinoMegaShieldPCB repository on GitHub. It is a 2-layer board of 101.6 × 53.3 mm with 43 parts on 107 nets, routed with 244 tracks and 31 vias.
It is built around the IRLB8721PBF and L721RAHLP. Its parts include 17 connectors, 7 resistors, 7 transistors, 2 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7 |
| 7 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4, MH5, MH6 |
| 3 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8, J9, J10 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J11, J12 |
| 2 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J13, J14 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J15, J16 |
| 2 | MP6500_Pololu | Module:Pololu_Breakout-16_15.2x20.3mm | U1, U2 |
| 1 | 450301014042 | footprints:SW_450301014042_WRE | SW1 |
| 1 | Communication | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J7 |
| 1 | Digital | Connector_PinSocket_2.54mm:PinSocket_2x18_P2.54mm_Vertical | J4 |
| 1 | Fuse | Fuse:Fuseholder_TR5_Littelfuse_No560_No460 | F1 |
| 1 | L721RAHLP | L721RAHLP:SWITCHCRAFT_L721RAHLP | J17 |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J5 |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
Questions
How big is the ArduinoMegaShield PCB?
It measures 101.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArduinoMegaShield use?
43 parts, built around the IRLB8721PBF and L721RAHLP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArduinoMegaShield KiCad files?
From the ykbl27/ArduinoMegaShieldPCB repository on GitHub, at the commit this page was made from: the board is ArduinoMegaShield.kicad_pcb and its schematic ArduinoMegaShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArduinoMegaShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask ykbl27 before reusing the design.
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1