

TX Board
Rice ECE BEAMFORM Capstone Project Repo
- Size
- 170.3 × 102.7 mm
- Copper layers
- 4
- Thickness
- 0.16 mm
- Parts
- 261
- Nets
- 172
- Pads
- 987
- Tracks, vias
- 1,377, 494
- Pours
- 835
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Sep 2025
- Updated
- 27 Aug 2026
Overview
TX Board is an open-source printed circuit board by yilmaz-kaan, from the yilmaz-kaan/OpenPhasedArray repository on GitHub. It is a 4-layer board of 170.3 × 102.7 mm with 261 parts on 172 nets, routed with 1,377 tracks and 494 vias.
It is built around the MAPS-010164-TR0500, QPA9122TR7 and GP2Y1+, with the BDCA1-10-40+, RFSA3713TR7 and LT3041ADE#PBF among its other parts. Its parts include 112 capacitors, 65 resistors, 32 inductors, 28 connectors and 15 ICs.
Main components
9MAPS-010164-TR0500
PQFN-24(4x4)-40℃~+85℃ -5.5V~-3V、3V~5.5V 2.3GHz~3.8GHz Phase Shifter Radar PQFN-24(4x4) RF Misc ICs and Modules ROHSMACOMRF Misc ICs And ModulesQPA9122TR7
QFN-16-EP(3x3)-40℃~+105℃ 18.1dB 18.9dB 2.3GHz~5GHz 25.3dBm 32.9dBm 36dB 4.75V~5.25V 5.3dB 95mA Low-power mode QFN-16-EP(3x3) RF Amplifiers ROHSQorvoRF AmplifiersGP2Y1+
VQFN-12-EP-40℃~+85℃ 0.6deg 0.89mm 1.55GHz~4.4GHz 1dB 2 way 20dB 3mm 3mm VQFN-12-EP RF Power Splitters / Combiners ROHSMini-CircuitsRF Power Splitters / CombinersBDCA1-10-40+
SMD-10P,7.6x6.4mm-55℃~+100℃ 0.8dB、1dB、1.05dB、1.05dB、1.15dB 1.6GHz~4GHz 9.1dB、9.5dB、9.6dB、10.1dB、10.8dB Bidirectional coupling SMD-10P,7.6x6.4mm RF Directional Coupler ROHSMini-CircuitsRF Directional CouplerRFSA3713TR7
QFN-16-EP(3x3)-40℃~+105℃ 0.25dB 1.4dB 31.75dB 50Ω 5MHz~6GHz Digitally programmable attenuation、Digital control interface QFN-16-EP(3x3) RF Attenuators ROHSQorvoRF AttenuatorsLT3041ADE#PBF
DFN-14-EP(3x4)-40℃~+125℃@(Tj) 1 1.0uVrms 1A 200mV~15V 20V 310mV@(1A) 4.3mA 80dB@(1MHz) Adjustable Positive Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Reverse polarity voltage protection、Reverse-polarity current protection、Adjustable current limiting DFN-14-EP(3x4) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLT3099ADE#PBF
DFN-14(3x4)-40℃~+125℃ 0V~19V 1.4uVrms 1A 20V 350mV@(1A) 96dB Adjustable Negative Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Operating status indication、Adjustable current limiting DFN-14(3x4) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesUncategorisedMM8030-2610RJ3
SMD-40℃~+85℃ 1 11GHz 30V 50Ω Board Side Inner hole SMD Coaxial Connectors (RF) ROHSMurataCoaxial Connectors (RF)SLW-865144-2A-N-SMT-TR
SMD-3P,8.6x4.4mm-20℃~+70℃ 10,000 cycles 300mA 4.4mm 50V 7.1mm 8.6mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount,Vertical SMD-3P,8.6x4.4mm Slide Switches ROHSCUISlide Switches
README
README.mdbeamers
Rice University 2025-2026 ECE Senior Capstone Project Repository Team BEAMFORM
The OpenPhasedArray is an open-source, modular 4-element transceiver phased-array board adaptable across software-defined radio platforms and optimized for S-band frequencies. It is ideal for hobby or research-grade beamforming experiments or sensing and communications prototyping. It is a modular design that is easily stackable both vertically and horizontally using the provided 3D-printable board mount. It is (optionally) interfaced with by the FT232H USB-to-serial converter for easy, Python-based control.
Specification and Info
- 2.4 – 3.7 GHz operating frequency
- Small form factor, 4.128” x 3.534”
- 21 dB peak gain per channel in TX
- 14 dB peak gain per channel in RX
- 5.625° nominal phase shifter resolution with 64 states
- 0.254 dB attenuator resolution with 128 states
- 500 ns typical TX/RX switching time
- 6V DC Power thru barrel jack-- 16V maximum
- <1mA quiescent current, 700mA maximum @ 6V input
Repo Contents
- Hardware
- OpenPhasedArray schematic, design, and gerber files
- Evaluation boards for most RF components used on the OpenPhasedArray
- An 8-element microstrip patch antenna array that can be paired with the OpenPhasedArray
- The original 'TXBoard' Prototype schematic, design, and gerber files
- The secondary 'TXBoard2' Prototype schematic, design, and gerber files
- 'STM32EVAL,' an experiment for future revisions that allow much larger scale integration
- Software
- Control code for various versions of the board, except for Rev. 2 due to layout errors.
- Leftover code and scripts from testing and demonstrating board performance in an Anechoic chamber
Parts
261| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 1.3 pF | Capacitor_SMD:C_0603_1608Metric | C17, C18, C19, C22, C25, C26, C27, C40, C41, C42, C45, C48, C49, C50, C63, C64 +12 |
| 28 | 50 | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21, R22, R23, R24, R30, R31, R32, R33, R34, R35, R36, R42, R43 +12 |
| 28 | L_Ferrite | Inductor_SMD:L_0201_0603Metric_Pad0.64x0.40mm_HandSolder | L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23, L24, L25 +12 |
| 20 | 100 pF | Capacitor_SMD:C_0603_1608Metric | C29, C31, C32, C34, C52, C54, C55, C57, C75, C100, C101, C103, C106, C108, C110, C112 +4 |
| 16 | 0 | Resistor_SMD:R_0603_1608Metric | R3, R5, R6, R7, R8, R9, R10, R11, R26, R28, R38, R40, R50, R52, R62, R64 |
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C13, C14, C20, C36, C37, C43, C59, C60, C66, C82, C83, C89 |
| 13 | 100pF | Capacitor_SMD:C_0603_1608Metric | C5, C15, C16, C21, C38, C39, C44, C61, C62, C67, C84, C85, C90 |
| 12 | 1 uF | Capacitor_SMD:C_0603_1608Metric | C30, C33, C53, C56, C76, C79, C99, C102, C105, C107, C109, C111 |
| 12 | MM8030-2610RJ3 | tx_board_footprints:MM80302610RJ3 | J9, J10, J11, J12, J13, J14, J16, J17, J19, J20, J22, J23 |
| 8 | 18 pF | Capacitor_SMD:C_0402_1005Metric | C28, C35, C51, C58, C74, C81, C97, C104 |
| 6 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C3, C6, C8, C9, C10 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C7, C24, C47, C70, C93 |
| 5 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1, J24, J26, J27, J28 |
| 4 | 12 nH | Inductor_SMD:L_0603_1608Metric | L1, L2, L3, L4 |
| 4 | 470p | Capacitor_SMD:C_0603_1608Metric | C23, C46, C69, C92 |
| 4 | 49.9k | Resistor_SMD:R_0603_1608Metric | R13, R15, R16, R17 |
| 4 | 50 | Resistor_SMD:R_0402_1005Metric | R66, R67, R68, R69 |
| 4 | 51 | Resistor_SMD:R_0603_1608Metric | R27, R39, R51, R63 |
| 4 | 8.2 | Resistor_SMD:R_0603_1608Metric | R25, R37, R49, R61 |
| 4 | BDCA1-10-40+ | BDCA1-10-40+:BDCA11040 | HY1, HY2, HY3, HY4 |
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4, J5 |
| 4 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J6, J15, J18, J21 |
| 4 | MAPS-010164-TR0500 | tx_board_footprints:QFN50P400X400X100-25N-D | IC7, IC9, IC11, IC13 |
| 4 | QPA9122TR7 | tx_board_footprints:QPA9122TR7 | IC8, IC10, IC12, IC14 |
| 4 | RFSA3713TR7 | tx_board_footprints:QFN50P300X300X90-17N | AT1, AT2, AT3, AT4 |
| 3 | GP2Y1+ | tx_board_footprints:QFN51P300X300X89-13N | IC1, IC2, IC3 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C11, C12 |
| 2 | 453k | Resistor_SMD:R_0603_1608Metric | R12, R14 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | ADPL40502AUJZ-1.5-R7 | tx_board_footprints:SOT95P280X100-5N | IC6 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Horizontal | J8 |
| 1 | Conn_02x14_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x14_P2.54mm_Horizontal | J25 |
| 1 | LT3041ADE#PBF | tx_board_footprints:SON50P300X400X80-15N-D | IC4 |
| 1 | LT3099ADE#PBF | tx_board_footprints:SON50P300X400X80-15N-D | IC5 |
| 1 | SLW-865144-2A-N-SMT-TR | SLW-865144-2A-N-SMT-TR:SW_SLW-865144-2A-N-SMT-TR | S1 |
| 1 | SN74HCT138NSR | tx_board_footprints:NS16 | U1 |
More from yilmaz-kaan/OpenPhasedArray
7- 4 layers104.9 × 88.3 mm

- 4 layers47.8 × 35.1 mm

- 2 layers48.5 × 38.8 mm

MAPS-010164-TR0500 Eval Board
yilmaz-kaan/OpenPhasedArray
Rice ECE BEAMFORM Capstone Project Repo
23 parts - 2 layers58.5 × 32.9 mm

- 2 layers32 × 48 mm

PMA3-63GLN HSWA2-63DR+-EVAL
yilmaz-kaan/OpenPhasedArray
Rice ECE BEAMFORM Capstone Project Repo
19 parts - 2 layers54.5 × 45.5 mm

- 2 layers225 × 80 mm

Similar boards
- 4 layers75.2 × 99.5 mm

FOC
nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…
261 parts81 - 4 layers130 × 110 mm

- 4 layers70.8 × 110 mm

- 4 layers272.5 × 107.4 mm

Corne light
idank/keyboards
This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.
261 parts10CC-BY-SA-4.0 - 4 layers327.6 × 186.9 mm

- 4 layers147.5 × 134 mm

- 4 layers112.3 × 55.8 mm

- 4 layers74.3 × 115.1 mm

Questions
How big is the TX Board PCB?
It measures 170.3 × 102.7 mm and has 4 copper layers, 0.16 mm thick.
What parts does the TX Board use?
261 parts, built around the MAPS-010164-TR0500, QPA9122TR7, GP2Y1+ and BDCA1-10-40+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TX Board KiCad files?
From the yilmaz-kaan/OpenPhasedArray repository on GitHub, at the commit this page was made from: the board is Hardware/TX_Board/TX_Board.kicad_pcb and its schematic Hardware/FiniteAntennaPatch/FiniteAntennaPatch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TX Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask yilmaz-kaan before reusing the design.