Skip to the content
2 layers39.6 × 35.7 mmH bridge dc motor controller, the printed circuit board in 3D

H bridge dc motor controller

yendiDev/h-bridge-dc-motor-controller

This PCB design uses PMOS and NMOS field-effect transistors to control the direction of current flowing to a DC motor.

Size
39.6 × 35.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
15
Pads
39
Tracks, vias
86, 4
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
27 Dec 2024
Updated
27 Dec 2024

Overview

H bridge dc motor controller is an open-source printed circuit board by yendiDev, from the yendiDev/h-bridge-dc-motor-controller repository on GitHub. It is a 2-layer board of 39.6 × 35.7 mm with 14 parts on 15 nets, routed with 86 tracks and 4 vias.

It is built around the AO3401A and IRLML0030. Its parts include 4 resistors, 4 transistors, 4 connectors and 2 ICs. It belongs with the robots and motor control and interfaces and adapters boards of this library.

Main components

2

README

README.md

H-Bridge DC Motor Controller

To be able to control a DC motor in varying speed and direction, an h-brige motor controller is essential. This pcb design uses PMOS and NMOS field-effect transistors to control the direction of current flowing to a DC motor, allowing for it to be controlled in different ways using a microcontroller.

It also includes opto-electronic oscillators for ensuring voltage spikes and unforseen current draws from rather noisy DC motors do not affect a microcontroller connected to it. It makes available screw terminals for connecting.

Below are screenshots of the PCB:

Schematics:

Capture

PCB Layout:

Front layer:

Capture

Bottom layer:

Capture

3D view of PCB:

Capture

Capture

Capture

Capture

Parts

14
QtyValueFootprintReferences
4RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4
24N25Package_DIP:DIP-6_W7.62mmU1, U2
2AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q3
2IRLML0030Package_TO_SOT_SMD:SOT-23Q2, Q4
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ1, JE
1Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ4

Similar boards

  • 2 layers56.8 × 19 mmOpen esc, the printed circuit board in 3D

    Open esc

    rmingon/open-esc

    Open-Source 3-Phase Sensorless ESC Firmware

    34 parts
  • 6 layers80 × 80 mmEps, the printed circuit board in 3D

    Eps

    OSUSat/cubesat

    Open Source Earth Imaging Satellite Hardware + Firmware

    413 parts8MIT
  • 4 layers358 × 40 mmLongboi, the printed circuit board in 3D

    Longboi

    KungfuPancake/longboi

    Possibly the longest controller board to control the BoxTurtle AFC

    297 parts7Apache-2.0
  • 2 layers22.1 × 18 mmHelena base sd, the printed circuit board in 3D

    Helena base sd

    Reisi/Helena

    Helena is an alternative driver for the Yinding or KD2 Headlight Cycling Lamp.

    59 parts5BSD-2-Clause
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 2 layers59.1 × 75.7 mmPS MotorControllerInterfacePCB, the printed circuit board in 3D

    PS MotorControllerInterfacePCB

    lhr-solar/PS-MotorControllerInterfacePCB

    Provides power conversion/protection and fan control for the Prohelion WaveSculptor 22 motor controller

    127 parts3
  • 2 layers86.6 × 71.8 mmVehicleControlUnit, the printed circuit board in 3D

    VehicleControlUnit

    lhr-solar/VCAT-VehicleControlUnit

    Vehicle Control Unit (VCU) for the 2026 Longhorn Racing Solar car

    142 parts2MIT
  • 2 layers45 × 72 mmRelay, the printed circuit board in 3D

    Relay

    adarwoo/modbus_relay

    A modbus RTU relay board with 3 relays for the CNC. This uses the ASX framework

    43 parts1

Questions

How big is the H bridge dc motor controller PCB?

It measures 39.6 × 35.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the H bridge dc motor controller use?

14 parts, built around the AO3401A and IRLML0030. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the H bridge dc motor controller KiCad files?

From the yendiDev/h-bridge-dc-motor-controller repository on GitHub, at the commit this page was made from: the board is H-Bridge DC Motor Controller.kicad_pcb and its schematic H-Bridge DC Motor Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the H bridge dc motor controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask yendiDev before reusing the design.