2 layers97.5 × 73.5 mm
Schina ponte h
marlaoza/Gigante-de-MDF
Projeto em C para controle de um carrinho de batalha via bluetooth
39 parts
2 layers110 × 90 mm
Electrion pcb
yashhingu2005/pcb-maker-pcb- Size
- 110 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 88
- Pads
- 234
- Tracks, vias
- 452, 17
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Oct 2026
- Updated
- 21 Oct 2026
Overview
Electrion pcb is an open-source printed circuit board by yashhingu2005, from the yashhingu2005/pcb-maker-pcb repository on GitHub. It is a 2-layer board of 110 × 90 mm with 51 parts on 88 nets, routed with 452 tracks and 17 vias.
It is built around the ATMEGA328P-PU, CH340C and L298N. Its parts include 14 resistors, 12 connectors, 10 capacitors, 8 diodes and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
L298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor Driver
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 2.2 kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R9, R10, R12, R13, R14 |
| 4 | 100µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7, C8, C9, C10 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R5, R6 |
| 3 | Conn_01x04_Socket | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3, J4, J5 |
| 3 | L | LED_THT:LED_D3.0mm | D5, D7, D8 |
| 3 | ~ | TMC2209:MODULE_TMC2209_SILENTSTEPSTICK | X_AXIS, Y_AXIS, Z_AXIS |
| 2 | 100 nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5 |
| 2 | 22pf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | + - | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J6 |
| 1 | 1 kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 10µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 12v_pwr | LED_THT:LED_D3.0mm | D2 |
| 1 | 4.7 kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 470µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | ABL-16.000MHZ-B2-T | 16MHZ:XTAL_HC49P488W46L1150T500H350 | Y1 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | L298N | Package_TO_SOT_THT:TO-220-15_P2.54x5.08mm_StaggerOdd_Lead4.58mm_Vertical | U6 |
| 1 | M1 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J10 |
| 1 | M2 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J11 |
| 1 | RX | LED_THT:LED_D3.0mm | D3 |
| 1 | TX | LED_THT:LED_D3.0mm | D4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | X_STOP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Y_STOP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Z_STOP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | laser | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | rx | LED_THT:LED_D3.0mm | D6 |
| 1 | usb_pwr | LED_THT:LED_D3.0mm | D1 |
Questions
How big is the Electrion pcb PCB?
It measures 110 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Electrion pcb use?
51 parts, built around the ATMEGA328P-PU, CH340C and L298N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Electrion pcb KiCad files?
From the yashhingu2005/pcb-maker-pcb repository on GitHub, at the commit this page was made from: the board is electrion pcb.kicad_pcb and its schematic electrion pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Electrion pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask yashhingu2005 before reusing the design.
Similar boards
- 2 layers204.5 × 100.3 mm
Carrinho remoto
phbnascimento/carrinho-pizza
Código fonte, documentação, esquemáticos e PCB do projeto "Gigantes de MDF"
48 parts - 4 layers222 × 100 mm
HydroScan V1
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
156 parts1 - 4 layers130.5 × 133 mm
PCB Board
amnxlab/Void-SmartBot
A professionally engineered 4-layer Control PCB for mobile robotics and embedded systems.
48 parts - 2 layers209.9 × 135.9 mm
- 2 layers185.4 × 152.4 mm
- 2 layers130 × 75 mm
Treasure box main
mtrunzo12/TreasureBox-build
Build along with a knock-to-unlock toy chest: firmware, KiCad files, parts lists and a parent checklist.
39 parts - 2 layers60 × 60 mm
