2 layers45 × 18 mm
2 layers35 × 30 mm
DriverTest1
yaqwsx/headlamp- Size
- 35 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 26
- Pads
- 156
- Tracks, vias
- 227, 91
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Oct 2018
- Updated
- 11 Aug 2020
Overview
DriverTest1 is an open-source printed circuit board by yaqwsx, from the yaqwsx/headlamp repository on GitHub. It is a 2-layer board of 35 × 30 mm with 50 parts on 26 nets, routed with 227 tracks and 91 vias.
It is built around the TPH2504-SR, TPS63020 and XC6206P332MR. Its parts include 19 resistors, 15 capacitors, 3 ICs, 2 transistors and 2 connectors.
Main components
3
TPH2504-SR
SOIC-14-40℃~+125℃ 0.001pA 0.3pA 120MHz 180V/us 1uV/℃ 2.5V~5.5V 290mA 4 500uV 6.5mA 6.5nV/√Hz@1MHz 85dB Enable/shutdown function、ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Operational Amplifier ROHS3PEAKOperational AmplifierTPS63020
UncategorisedTexas Instruments
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdheadlamp
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C6, C7, C9 |
| 6 | 120k | Resistor_SMD:R_0603_1608Metric | R2, R3, R7, R13, R16, R17 |
| 6 | 30k | Resistor_SMD:R_0603_1608Metric | R6, R8, R11, R12, R14, R15 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C5, C10, C13 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | 51k | Resistor_SMD:R_0603_1608Metric | R9, R18 |
| 1 | 1k8 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1n5 | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 1u5 | headlamp:MWSA0518 | L1 |
| 1 | 20m | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 220p | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 3V3 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 3n3 | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 9k1 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AmplifiedFeedback | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | ChipFeedback | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | INPUT | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J2 |
| 1 | LED_OUT | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J1 |
| 1 | SenseTie | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | TPH2504-SR | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | TPS63020 | headlamp:TPS63020 | U1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U3 |
More from yaqwsx/headlamp
3- 2 layers39 × 18 mm
- 2 layers40 × 60 mm
Similar boards
- 4 layers55 × 35 mm
Beaglephone pocket
HologramEducation/beaglephone-pocket
A cellular add-on board for the BeaglePocket
269 parts13CC-BY-4.0 - 4 layers53 × 33 mm
LiPo BuckBoost Charger
potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020
This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…
63 parts9Apache-2.0 - 2 layers
- 2 layers83.8 × 31.8 mm
BalthazarPSU
Turbosavski/balthazarPSU
Balthazar open-hardware laptop - PSU charger + audio amplifier module
88 parts3 - 2 layers98 × 49 mm
AirMQ - ESP8266-0.4.8
AirMQ/AirMQ-sensor
Root repository for AirMQ hardware project
94 parts2CERN-OHL-P-2.0 - 2 layers126.7 × 25.3 mm
BalthazarPSU2
balthazar-space/Balthazar-PSU-IO-v.2
Balthazar open-hardware laptop - version 2 of keyboard and touchpad module controller
148 parts2 - 4 layers69 × 81 mm
SharpCONSOLE
lastlxrd/Pogopo
Open-source modular ESP32-S3 handheld console featuring custom hardware, a Sharp Memory LCD, pogopoOS, emulation, motion controls, audio, haptics, and expandable modules.
196 parts2Apache-2.0 - 6 layers
Sentinel HYDRA
dhruv1859/CARVantaBAC
🧬 CARVanta Next-Generation Precision Oncology & AI CAR-T Cell Platform Interactive 3D Biological Digital Twin • 3D Neural Bridge • Sentinel HYDRA Biosensor
135 parts1Apache-2.0
Questions
How big is the DriverTest1 PCB?
It measures 35 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DriverTest1 use?
50 parts, built around the TPH2504-SR, TPS63020 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DriverTest1 KiCad files?
From the yaqwsx/headlamp repository on GitHub, at the commit this page was made from: the board is driverTest1/driverTest1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DriverTest1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask yaqwsx before reusing the design.