2 layers46.3 × 47.6 mm
2 layers
Noname
cculpepper/APRSDongle4Telemetry module for a HAB or a rocket, or a car, or a....
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 608
- Nets
- 124
- Pads
- 2,590
- Tracks, vias
- 8,113, 950
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Jun 2015
- Updated
- 24 Aug 2016
Overview
Noname is an open-source printed circuit board by cculpepper, from the cculpepper/APRSDongle repository on GitHub. It is a 2-layer board with 608 parts on 124 nets, routed with 8,113 tracks and 950 vias.
It is built around the MKL26Z128VLH4, TPS63020 and 24C16. Its parts include 226 capacitors, 101 resistors, 65 inductors, 51 connectors and 35 diodes. It belongs with the AVR (ATmega, ATtiny) and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3
MKL26Z128VLH4
LQFP-64(10x10)-40℃~+105℃ 1.71V~3.6V 128KB 12bit 16KB 16bit 32 Bit 48MHz 50 ARM Cortex-M0+ Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)TPS63020
UncategorisedTexas Instruments
24C16
SOP-8SOP-8 EEPROM ROHSGAOGE MICROCHIPEEPROM
README
README.md#APRSDongle
This is a hardware and software project that aims to be a logger and control module for a high altitude balloon or other device.
##Hardware
There are multiple modular boards that each perform a task.
The power board currently regulates 3-5V down to 3.3, suitable for Li-Po cells.
It incorporates a microcontroller and switchmode regulator. Power is passed
through a header to ease design of later modules.
The radio board uses the Axsem (ON Semiconductor) AX5043 IC and a power amplifier Currently it is set up for the amateur radio 2M band. The chip can do hardware FSK, GMFSK, AFSK and analog FM. Its a really cool chip. The PA will do a watt, nominally. The board also includes a MCU, Freescale KL26 and GPS module on the back.
The main board currently will not work with the new radio as the pinout changed. Currently it is set up for the DRA818 "Baofeng on a chip" 2m radio module. As the data must be generated by audio, its slow and takes a lot of processing to use. The board will be reworked to use the new radio module after testing.
##Software
Software is written in C with the KEIL IDE. This may change in the future because linux, but for now, it works.
Feel free to take a look and contribute!
Parts
608| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | R | Resistors_SMD:R_0603 | R1, R1, R1, R1, R1, R1, R1, R1, R1, R10, R10, R10, R10, R11, R11, R11 +50 |
| 48 | C | Capacitors_SMD:C_0603 | C1, C1, C1, C1, C10, C10, C10, C10, C11, C11, C11, C11, C12, C12, C12, C12 +32 |
| 24 | C | Capacitors_SMD:C_0402 | C1, C1, C1, C1, C2, C2, C2, C2, C23, C23, C23, C23, C28, C28, C28, C28 +8 |
| 16 | 10pf | Capacitors_SMD:C_0402 | C5, C5, C5, C5, C6, C6, C6, C6, C7, C7, C7, C7, C8, C8, C8, C8 |
| 16 | 1nf | Capacitors_SMD:C_0402 | C18, C18, C18, C18, C21, C21, C21, C21, C26, C26, C26, C26, C31, C31, C31, C31 |
| 16 | LED | LEDs:LED-0805 | D1, D1, D1, D1, D2, D2, D2, D2, D3, D3, D3, D3, D4, D4, D4, D4 |
| 12 | 10nf | Capacitors_SMD:C_0402 | C17, C17, C17, C17, C19, C19, C19, C19, C27, C27, C27, C27 |
| 12 | 120nH | Resistors_SMD:R_0402 | L4, L4, L4, L4, L5, L5, L5, L5, L9, L9, L9, L9 |
| 12 | SJMPOpen | SparkFun:SparkFun-SJ_2S-NO | JMP1, JMP1, JMP1, JMP1, JMP2, JMP2, JMP2, JMP2, JMP3, JMP3, JMP3, JMP3 |
| 10 | 100K | Resistors_SMD:R_0603 | R8, R8, R8, R8, R8, R9, R9, R9, R9, R9 |
| 10 | 10u | Capacitors_SMD:C_0805 | C1, C1, C1, C1, C1, C2, C2, C2, C2, C2 |
| 10 | 1u | Capacitors_SMD:C_0603 | C4, C4, C4, C4, C4, C5, C5, C5, C5, C5 |
| 9 | CONN_11X2 | hardwareRev1:1.27mmPitchHeader11X2 | P2, P2, P2, P2, P2, P6, P6, P6, P6 |
| 8 | 100pf | Capacitors_SMD:C_0402 | C33, C33, C33, C33, C35, C35, C35, C35 |
| 8 | 12pf | Capacitors_SMD:C_0402 | C9, C9, C9, C9, C10, C10, C10, C10 |
| 8 | 150nH | Resistors_SMD:R_0402 | L2, L2, L2, L2, L3, L3, L3, L3 |
| 8 | 27pf | Capacitors_SMD:C_0402 | C22, C22, C22, C22, C24, C24, C24, C24 |
| 8 | 3.3uf | Capacitors_SMD:C_1206 | C29, C29, C29, C29, C30, C30, C30, C30 |
| 8 | 47pf | Capacitors_SMD:C_0402 | C15, C15, C15, C15, C25, C25, C25, C25 |
| 8 | 68nH | Resistors_SMD:R_0402 | L6, L6, L6, L6, L7, L7, L7, L7 |
| 8 | TAC_SWITCHSMD | SparkFun:SparkFun-TACTILE_SWITCH_SMD | S1, S1, S1, S1, S2, S2, S2, S2 |
| 5 | 0.01 | Resistors_SMD:R_0603 | R5, R5, R5, R5, R5 |
| 5 | 100n | Capacitors_SMD:C_0603 | C3, C3, C3, C3, C3 |
| 5 | 120u | Capacitors_SMD:c_elec_6.3x7.7 | C6, C6, C6, C6, C6 |
| 5 | 137K | Resistors_SMD:R_0603 | R4, R4, R4, R4, R4 |
| 5 | 1uh | Inductors:SELF-WE-TPC_M | L1, L1, L1, L1, L1 |
| 5 | 55 | Resistors_SMD:R_0603 | R6, R6, R6, R6, R6 |
| 5 | 75 | Resistors_SMD:R_0603 | R7, R7, R7, R7, R7 |
| 5 | 768K | Resistors_SMD:R_0603 | R3, R3, R3, R3, R3 |
| 5 | ATTINY24A-M-FIXED | w_smd_qfn:qfn-20 | IC1, IC1, IC1, IC1, IC1 |
| 5 | AVRProg | Pin_Headers:Pin_Header_Straight_2x03 | P3, P3, P3, P3, P3 |
| 5 | DIODE | Diodes_ThroughHole:Diode_DO-41_SOD81_Vertical_KathodeUp | D1, D1, D1, D1, D1 |
| 5 | EN | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1, TP1, TP1, TP1, TP1 |
| 5 | FUSE | SMD_Packages:SMD-2112_Pol | F1, F1, F1, F1, F1 |
| 5 | LOGO | hardwareRev1:giant | G***, G***, G***, G***, G*** |
| 5 | NCP508 | SMD:SOT-23-5 | U2, U2, U2, U2, U2 |
| 5 | STAT1G | LEDs:LED-0805 | D2, D2, D2, D2, D2 |
| 5 | STAT2R | LEDs:LED-0805 | D3, D3, D3, D3, D3 |
| 5 | TPS63020 | hardwareRev1:TPS63020 | U1, U1, U1, U1, U1 |
| 5 | VIN | Pin_Headers:Pin_Header_Straight_1x02 | P1, P1, P1, P1, P1 |
| 4 | 1.8pf | Capacitors_SMD:C_0402 | C16, C16, C16, C16 |
| 4 | 150nh | Resistors_SMD:R_0402 | L8, L8, L8, L8 |
| 4 | 15nH | Resistors_SMD:R_0402 | L15, L15, L15, L15 |
| 4 | 15pf | Capacitors_SMD:C_0402 | C20, C20, C20, C20 |
| 4 | 1uH | Resistors_SMD:R_0402 | L14, L14, L14, L14 |
| 4 | 1uf | Capacitors_SMD:C_0402 | C34, C34, C34, C34 |
| 4 | 2.2pf | Capacitors_SMD:C_0402 | C11, C11, C11, C11 |
| 4 | 22pf | Capacitors_SMD:C_0402 | C12, C12, C12, C12 |
| 4 | 24C16 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U2, U2, U2 |
| 4 | 33nH | Resistors_SMD:R_1206 | L13, L13, L13, L13 |
| 4 | 33pf | Capacitors_SMD:C_0402 | C13, C13, C13, C13 |
| 4 | 39nH | Resistors_SMD:R_0402 | L10, L10, L10, L10 |
| 4 | 4.7pf | Capacitors_SMD:C_0402 | C14, C14, C14, C14 |
| 4 | 47nH | Resistors_SMD:R_0402 | L11, L11, L11, L11 |
| 4 | 56pf | Capacitors_SMD:C_0402 | C32, C32, C32, C32 |
| 4 | 8.2nH | Resistors_SMD:R_0402 | L12, L12, L12, L12 |
| 4 | ADC1 | Footprints:CONN_1x3 | K2, K2, K2, K2 |
| 4 | ADC2 | Footprints:CONN_1x5 | P3, P3, P3, P3 |
| 4 | AX503 | w_smd_qfn:qfn-28 | U1, U1, U1, U1 |
| 4 | C | Capacitors_ThroughHole:C_Rect_L13_W6_H12_P10 | C14, C14, C14, C14 |
| 4 | CAPAPOL | Capacitors_SMD:C_0603 | C7, C7, C7, C7 |
| 4 | CONN_5X2 | hardwareRev1:CortexDebug | P5, P5, P5, P5 |
| 4 | CONN_7 | Footprints:CONN_1x7 | P4, P4, P4, P4 |
| 4 | CRYSTAL_ABM3C | open-project:CRYSTAL_ABM3C | X1, X1, X1, X1 |
| 4 | DIODE | Diodes_ThroughHole:Diode_DO-41_SOD81_Vertical_AnodeUp | D5, D5, D5, D5 |
| 4 | DRA818 | dra818:DRA818 | RF2, RF2, RF2, RF2 |
| 4 | DRA818 | hardwareRev1:RFModuleOutline | RF1, RF1, RF1, RF1 |
| 4 | GPSAnt | hardwareRev1:GPSAnt | A1, A1, A1, A1 |
| 4 | GPSDM | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P7, P7, P7, P7 |
| 4 | GPSDP | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P8, P8, P8, P8 |
| 4 | I2C | Footprints:CONN_1x4 | P2, P2, P2, P2 |
| 4 | ID | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | P10, P10, P10, P10 |
| 4 | INDUCTOR | Resistors_SMD:R_0402 | L1, L1, L1, L1 |
| 4 | LOGO | hardwareRev1:TREX | G***, G***, G***, G*** |
| 4 | LOGO | hardwareRev1:tank | G***, G***, G***, G*** |
| 4 | MICRO-B_USB | USB:USB micro B female | U3, U3, U3, U3 |
| 4 | MKL26Z128VLH4 | w_smd_lqfp:lqfp64 | U1, U1, U1, U1 |
| 4 | MOS_P_NUM | SMD_Packages:SOT-323 | Q1, Q1, Q1, Q1 |
| 4 | MicroSD | Footprints:MICRO_SD_HINGE_AMP | J1, J1, J1, J1 |
| 4 | NEO7 | hardwareRev1:NEO-7 | RF1, RF1, RF1, RF1 |
The 580 most common of 608 parts.
More from cculpepper/APRSDongle
4- 4 layers40.9 × 24.9 mm
- 2 layers
HardwareRev1
cculpepper/APRSDongle
Telemetry module for a HAB or a rocket, or a car, or a....
60 parts4 - 2 layers
Similar boards
- 2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers104.7 × 55.6 mm
Lab1
jsjolund/dmx512-controller-board
Controller board for DMX512 compatible devices, built around the STM32F4 processor
96 parts26 - 4 layers100 × 80 mm
- 2 layers51.8 × 71.7 mm
Altera Vector adapter V2
james10952001/FPGA-mini-vector-arcade
Vector game daughter board for the Altera EP2C5T144 Cyclone II "mini board"
57 parts4GPL-3.0 - 2 layers65 × 56.5 mm
- 4 layers65 × 56 mm
Radio
hedj/radio
A minimal software-defined radio, based on the GreenArrays GA144A12 microprocessor. Provision is made for connection to a Raspberry Pi B+ and shields.
90 parts2GPL-2.0 - 2 layers49 × 27.5 mm
- 4 layers99.5 × 56 mm
Releasebuttonboard
apparentlymart/release-button
Driver for a Raspberry Pi-based Deployment Trigger Button
34 parts1
Questions
What parts does the Noname use?
608 parts, built around the MKL26Z128VLH4, TPS63020 and 24C16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Noname KiCad files?
From the cculpepper/APRSDongle repository on GitHub, at the commit this page was made from: the board is hardwareRev1.pretty/noname.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Noname design in my own project?
Its repository states no licence, so its author keeps all rights: ask cculpepper before reusing the design.