Skip to the content
2 layersSpindle light, the printed circuit board in 3D

Spindle light

yaqwsx/cnc_mill2

LinuxCNC configuration and HAL modules for my machine

Copper layers
2
Thickness
1.6 mm
Parts
81
Nets
62
Pads
162
Tracks, vias
165, 1
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
29 Dec 2015
Updated
4 May 2024

Overview

Spindle light is an open-source printed circuit board by yaqwsx, from the yaqwsx/cnc_mill repository on GitHub, published under the MIT licence. It is a 2-layer board with 81 parts on 62 nets, routed with 165 tracks and 1 via.

Its parts include 60 diodes, 20 resistors and 1 connector.

README

README.md

My CNC mill

This repository contains everything related to the build of my CNC mill. The mill is driven by LinuxCNC.

Structure

  • arduino_sketches - I am not a fan of Arduino, however it is great tool for simple prototypes. All source codes for prototypes is here.

  • config - LinuxCNC configuration and HAL files for the mill

  • hal_modules - LinuxCNC HAL modules for my custom hardware

  • hw_modules - PCBs & firmware for custom hardware

Parts

81
QtyValueFootprintReferences
60LEDLEDs:LED_PLCC_2835D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44
2047RResistors_SMD:R_1206R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +4
1CONN_01X02Connect:GS2P1

More from yaqwsx/cnc_mill

8
  • 2 layersSpindle light 2, the printed circuit board in 3D

    Spindle light 2

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    133 parts2MIT
  • 4 layers100 × 100 mmSpindle h bridge, the printed circuit board in 3D

    Spindle h bridge

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    66 parts2MIT
  • 2 layers72.4 × 132.1 mmStepper breakout, the printed circuit board in 3D

    Stepper breakout

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    56 parts2MIT
  • 2 layers61 × 106.7 mmPower board, the printed circuit board in 3D

    Power board

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    44 parts2MIT
  • 2 layers42 × 58 mmPwmToAnalog, the printed circuit board in 3D

    PwmToAnalog

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    38 parts2MIT
  • 2 layers43.7 × 22.1 mmControl board, the printed circuit board in 3D

    Control board

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    22 parts2MIT
  • 2 layers73.7 × 111.8 mmSpindle gpio breakout, the printed circuit board in 3D

    Spindle gpio breakout

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    14 parts2MIT
  • 2 layers48.3 × 177.8 mmStepper breakout, the printed circuit board in 3D

    Stepper breakout

    yaqwsx/cnc_mill

    LinuxCNC configuration and HAL modules for my machine

    12 parts2MIT

Similar boards

  • 2 layers162.9 × 178.9 mmAMPCD, the printed circuit board in 3D

    AMPCD

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    81 parts431
  • 2 layers177.2 × 114.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    81 parts184
  • 2 layersEdrumulus, the printed circuit board in 3D

    Edrumulus

    corrados/edrumulus

    Open Source E-Drum Trigger Module

    81 parts163GPL-2.0
  • 2 layers64 × 55 mmZynthiandac bk2, the printed circuit board in 3D

    Zynthiandac bk2

    zynthian/zynthian-hw

    Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

    81 parts156
  • 2 layersBD0027, the printed circuit board in 3D

    BD0027

    schlae/VapeRE

    Reverse engineered disposable v a p e boards

    81 parts136
  • 2 layers41.9 × 62.8 mmColumn, the printed circuit board in 3D

    Column

    AlaaSaadAbdo/Rommana

    A 30 key well powered by Xiao BLE

    81 parts105
  • 2 layers38.6 × 38.6 mmIotLedDriver, the printed circuit board in 3D

    IotLedDriver

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    81 parts94BSD-3-Clause
  • 2 layers98.5 × 45.4 mmIdawgz32, the printed circuit board in 3D

    Idawgz32

    ChrisChrisLoLo/idawgz32

    A full 32 key mechanical keyboard that can be made for only $5

    81 parts77GPL-3.0

Questions

What parts does the Spindle light use?

81 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Spindle light KiCad files?

From the yaqwsx/cnc_mill repository on GitHub, at the commit this page was made from: the board is hw_modules/spindle_light/spindle_light.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Spindle light design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).