2 layers
2 layers
Spindle light 2
yaqwsx/cnc_mill2LinuxCNC configuration and HAL modules for my machine
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 133
- Nets
- 101
- Pads
- 266
- Tracks, vias
- 66, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Dec 2015
- Updated
- 4 May 2024
Overview
Spindle light 2 is an open-source printed circuit board by yaqwsx, from the yaqwsx/cnc_mill repository on GitHub, published under the MIT licence. It is a 2-layer board with 133 parts on 101 nets, routed with 66 tracks and 33 vias.
Its parts include 99 diodes, 33 resistors and 1 connector.
README
README.mdMy CNC mill
This repository contains everything related to the build of my CNC mill. The mill is driven by LinuxCNC.
Structure
-
arduino_sketches- I am not a fan of Arduino, however it is great tool for simple prototypes. All source codes for prototypes is here. -
config- LinuxCNC configuration and HAL files for the mill -
hal_modules- LinuxCNC HAL modules for my custom hardware -
hw_modules- PCBs & firmware for custom hardware
Parts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 99 | LED | yaqwsx:LED_PLCC_2835_Handsoldering_Centered | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +83 |
| 33 | 47R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +17 |
| 1 | Power | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1.2mm | J1 |
More from yaqwsx/cnc_mill
8- 4 layers100 × 100 mm
- 2 layers72.4 × 132.1 mm
- 2 layers61 × 106.7 mm
- 2 layers42 × 58 mm
- 2 layers43.7 × 22.1 mm
- 2 layers73.7 × 111.8 mm
Spindle gpio breakout
yaqwsx/cnc_mill
LinuxCNC configuration and HAL modules for my machine
14 parts2MIT - 2 layers48.3 × 177.8 mm
Similar boards
- 2 layers139.1 × 107.7 mm
Lotus58 Glow 123
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
133 parts390 - 2 layers212 × 67 mm
Ui board
sbstnh/programmable_precision_resistor
A SCPI programmable precision resistor
133 parts65BSD-3-Clause - 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers116.8 × 73.7 mm
DuPal V3
DuPAL-PAL-DUmper/DuPAL_Board
This repository contains the KiCad files and the gerber files for the DuPAL boards.
133 parts57CC-BY-SA-4.0 - 2 layers233.7 × 91.5 mm
Skywatch
ozkan/skywatch
35% ergonomic ortholinear keyboard, powered by RP2040, along with OLED and hotswap sockets support
133 parts41MIT - 2 layers188.9 × 80.2 mm
Pandemonium BLE e7
calvin-mcd/pandemonium
30% alpha staggered keyboard with big ISO enter and bluetooth support
133 parts26GPL-3.0 - 2 layers100 × 100 mm
QRPAmplifier
profdc9/QRPAmplifier
Layout of WA2EBY amplifier in Kicad, licensed CC-BY-SA 4.0
133 parts26 - 2 layers
Foxie clock nano
afoxinsocks/foxie-clock
A Nixie-like, retro, RGB LED, Arduino-powered clock
133 parts24GPL-3.0
Questions
What parts does the Spindle light 2 use?
133 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spindle light 2 KiCad files?
From the yaqwsx/cnc_mill repository on GitHub, at the commit this page was made from: the board is hw_modules/spindle_light_2/spindle_light_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spindle light 2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).