
Power atiny v2
fijam/md-lpm
This project consists of hardware files and software for a coin-battery operated laser tester that fits in a MiniDisk case.

A small pocket flashlight built around the ATtiny412.
KiCad PocketLight is an open-source printed circuit board by yansha2903-bot, from the yansha2903-bot/PocketLight repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.1 × 35.2 mm with 9 parts on 9 nets, routed with 31 tracks and 0 vias.
It is built around the ATTINY412-SSN. Its parts include 3 resistors, 2 switches, 1 capacitor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A small pocket flashlight built around the ATtiny412.
This project started as a way to learn PCB design in KiCad and get more comfortable with embedded electronics. Instead of making something complicated, I wanted to build a simple device that I could actually understand from start to finish.
PocketLight.kicad_sch — schematicPocketLight.kicad_pcb — PCB layoutpocketlightlight.ino — Arduino firmwareBOM.csv — bill of materialsgerbers.zip — manufacturing filesThis project helped me understand:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10 kΩ | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 100 Ω | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATtiny412-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | R_Photo | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |

fijam/md-lpm
This project consists of hardware files and software for a coin-battery operated laser tester that fits in a MiniDisk case.


Fab-Lab-Island/fli-bootcamp-2025
About Fab Lab ísland bootcamp Húsavík 2025. Kíkið á síðuna fyrir neðan!

Brasseur2robot/Les-brasseurs-d-idees
Codebase de l'équipe légende des brasseurs d'idées concourant à la coupe de France de robotique. Vous pouvez y retrouver les différents fichiers utilisés pour la création et le fonctionnement de notre robot principal et…

SreeniEadara/Hopkins-iGEM-2022-electrical
Schematics and PCB designs for Hopkins iGEM 2022

user-will/cursedPCB
A quick start guide and related files for the Cursed PCB by Reil Industrial


carmisergio/denon-preout-mod
PCB designs and firmware for the Denon AVR-X1300W Pre-out mod
It measures 50.1 × 35.2 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the ATTINY412-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yansha2903-bot/PocketLight repository on GitHub, at the commit this page was made from: the board is KiCad PocketLight/KiCad PocketLight.kicad_pcb and its schematic KiCad PocketLight/KiCad PocketLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).