4 layers145.5 × 107.5 mm
2 layers85.4 × 50.8 mm
Adapter
yangxing844/keyboard1this stores some of my files for keyboards building
- Size
- 85.4 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 52
- Pads
- 214
- Tracks, vias
- 363, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Oct 2023
- Updated
- 29 Feb 2024
Overview
Adapter is an open-source printed circuit board by yangxing844, from the yangxing844/keyboard repository on GitHub. It is a 2-layer board of 85.4 × 50.8 mm with 69 parts on 52 nets, routed with 363 tracks and 16 vias.
Its parts include 14 connectors, 6 resistors, 4 switches and 2 ICs. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
README
charybdis/charybdis-pmw3610-breakout-nicenano/charybdis-pmw3610-breakout-nicenano/README.mdcharybdis-pmw3610-breakout
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | M4 | Library:MountingHole_4mm_Pad_thin | H1, H2, H3, H3, H4 |
| 4 | 5.1k | Library:R_1206_handsolder | R1, R3, R5, R6 |
| 4 | G*** | kibuzzard-61F019CB | kibuzzard-61F019CB, kibuzzard-61F019CB, kibuzzard-61F019CB, kibuzzard-61F019CB |
| 4 | G*** | kibuzzard-61F01957 | kibuzzard-61F01957, kibuzzard-61F01957, kibuzzard-61F01957, kibuzzard-61F01957 |
| 4 | G*** | kibuzzard-620B8D91 | kibuzzard-620B8D91, kibuzzard-620B8D91, kibuzzard-620B8D91, kibuzzard-620B8D91 |
| 4 | G*** | kibuzzard-61F01940 | kibuzzard-61F01940, kibuzzard-61F01940, kibuzzard-61F01940, kibuzzard-61F01940 |
| 2 | 4.7k | Library:R_1206_handsolder | R2, R4 |
| 2 | G*** | kibuzzard-620B8593 | kibuzzard-620B8593, kibuzzard-620B8593 |
| 2 | G*** | kibuzzard-6208EFFE | kibuzzard-6208EFFE, kibuzzard-6208EFFE |
| 2 | G*** | kibuzzard-61F01C84 | kibuzzard-61F01C84, kibuzzard-61F01C84 |
| 2 | G*** | kibuzzard-61F01A92 | kibuzzard-61F01A92, kibuzzard-61F01A92 |
| 2 | G*** | kibuzzard-61F01B61 | kibuzzard-61F01B61, kibuzzard-61F01B61 |
| 2 | Jumper_2_Open | Library:power_switch_jumper | JP1, JP2 |
| 2 | RGB | Library:header1x03 | J4, J5 |
| 2 | Ribbon | Library:6_PinHeader | J10, J12 |
| 2 | Ribbon | Library:5_PinHeader | J9, J11 |
| 2 | SW_SPDT | Library:SW_SPDT+H-MSK12C01_hor(7pin_SMD) | SW3, SW4 |
| 2 | SW_SPST | Library:PushSwitch | SW1, SW2 |
| 2 | Serial | Library:Jack_3.5mm_PJ320E_Horizontal | J1, J2 |
| 2 | battery charge | Library:PinHeader_1x02_P2.54mm_Vertical | J3, J6 |
| 2 | eliteC | Library:Elite-C | U1, U2 |
| 2 | serial | Library:PinHeader_1x04_P2.54mm_Vertical | J13, J14 |
| 2 | trackball | Library:6_PinHeader | J7, J8 |
| 1 | G*** | kibuzzard-62094D1C | kibuzzard-62094D1C |
| 1 | G*** | kibuzzard-6208EDFE | kibuzzard-6208EDFE |
| 1 | G*** | kibuzzard-6208EE22 | kibuzzard-6208EE22 |
| 1 | G*** | kibuzzard-62093EDE | kibuzzard-62093EDE |
| 1 | Val** | kbd:ResetSW_4P | RSW1 |
The 64 most common of 69 parts.
More from yangxing844/keyboard
7- 2 layers277.2 × 107.5 mm
- 2 layers127.6 × 90.6 mm
- 2 layers93.6 × 71.8 mm
- 2 layers62.3 × 63.7 mm
- 2 layers48.8 × 41.5 mm
- 2 layers38.7 × 42.7 mm
Similar boards
- 2 layers117.3 × 54.5 mm
- 2 layers100 × 96 mm
Backlight
jackw01/scanlight
A better light source for scanning color negative film
69 parts397CERN-OHL-W-2.0 - 2 layers135.9 × 102.2 mm
Ergo42
Biacco42/Ergo42
7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards
69 parts218 - 2 layers104.1 × 71.1 mm
Minifp
eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.
69 parts139 - 2 layers90 × 140 mm
Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
69 parts137 - 2 layers120 × 60 mm
Overglade Badges
KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!
69 parts126 - 2 layers142 × 20 mm
DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
69 parts94BSD-3-Clause - 2 layers163.1 × 111.9 mm
Questions
How big is the Adapter PCB?
It measures 85.4 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adapter use?
69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter KiCad files?
From the yangxing844/keyboard repository on GitHub, at the commit this page was made from: the board is charybdis/Bastardkb Elite-C-holder master adapter/adapter.kicad_pcb and its schematic charybdis/Bastardkb Charybdis-PCB-thumbs main flex/flex.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask yangxing844 before reusing the design.