

CanSat
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 76
- Pads
- 129
- Tracks, vias
- 138, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Sep 2025
- Updated
- 27 Jul 2026
Overview
CanSat is an open-source printed circuit board by YaelRoman, from the YaelRoman/Pipiolos repository on GitHub. It is a 2-layer board with 23 parts on 76 nets, routed with 138 tracks and 0 vias.
It is built around the BME280 and MPU-6500. Its parts include 14 connectors, 6 ICs, 1 resistor, 1 diode and 1 switch. It belongs with the ESP32 boards of this library.
Main components
2BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorMPU-6500
QFN-24-40℃~+85℃ 16bit 6uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BME280 | MyLibrary:BME280 | U5 |
| 1 | BME_XH2.54_H | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | BME_XH2.54_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | BatteryI2C_XH2.54_H | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J14 |
| 1 | BatteryI2C_XH2.54_M | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J13 |
| 1 | Battery_XH2.54_H | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | Battery_XH2.54_M | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | ESP32_DevKit_V1 | Library:esp32_devkit_v1_doit | U1 |
| 1 | GPS_XH2.54_H | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | GPS_XH2.54_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | LED_Testigo | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D1 |
| 1 | LiPoBoostI2C | MyLibrary:LiPoBoostI2C | U6 |
| 1 | LoRa Ra-02 | MyLibrary:LoRa Ra-02 | U2 |
| 1 | LoRa1_XH2.54_H | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | LoRa1_XH2.54_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | LoRa2_XH2.54_H | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J10 |
| 1 | LoRa2_XH2.54_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | MPU-6500 | MyLibrary:MPU-6500 | U4 |
| 1 | MPU_XH2.54_H | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | MPU_XH2.54_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | NEO6MV2 GPS | MyLibrary:NE06MV2 GPS | U3 |
| 1 | R_330Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | SW_Power | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW1 |
Similar boards
- 2 layers57.6 × 40 mm

- 4 layers55 × 97 mm

Melodio SelfMate V2
zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.
121 parts53 - 2 layers96 × 74.4 mm

Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 2 layers76 × 99.9 mm

- 2 layers60 × 50 mm

- 2 layers32.8 × 53.6 mm

Hermes
MeghanaM4/Hermes
make a PCB with an on-board sensor to transmit data via I2C, get the money to build it
10 parts2MIT - 2 layers100 × 100 mm

CopperPilotDrone
CopperPilot/CopperPilotDronePCB
Flight controller and airframe on one ESP32-S3 board. Fly it from any phone over its own Wi-Fi. Motor traces sized to IPC-2221 for about 3 A.
109 parts1 - 4 layers133.1 × 115.3 mm

Questions
What parts does the CanSat use?
23 parts, built around the BME280 and MPU-6500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CanSat KiCad files?
From the YaelRoman/Pipiolos repository on GitHub, at the commit this page was made from: the board is CanSat/CanSat.kicad_pcb and its schematic CanSat/CanSat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CanSat design in my own project?
Its repository states no licence, so its author keeps all rights: ask YaelRoman before reusing the design.