
ProDroidVR PCB
xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.

A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
DroidVR PCB is an open-source printed circuit board by xxdamlaxx, from the xxdamlaxx/DroidVR repository on GitHub. It is a 2-layer board of 30 × 100 mm with 49 parts on 58 nets.
It is built around the MT3608, COM-09032 and SS34, with the WS2812B among its other parts. Its parts include 15 resistors, 9 capacitors, 9 connectors, 6 transistors and 4 ICs.
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
DroidVR is available under a dual license model. Pick whichever fits your use case.
Use, modify, distribute, and sell DroidVR for free, as long as you provide clear and visible attribution in your project's documentation, about page, and repository.
Required attribution:
Built with DroidVR by xxdamlaxx
See LICENSE.md for full terms.
If you prefer not to include attribution, you can purchase a commercial license:
| Tier | Monthly Fee |
|---|---|
| Public / Open-Source Development | $500 / month |
| Private / Closed-Source Development | $5,000 / month |
See LICENSE-COMMERCIAL.md for full terms.
For commercial licensing inquiries, reach out via GitHub or email (coming soon).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R_1210 4.7KOhm | PCM_Resistor_SMD_AKL:R_1210_3225Metric | R1, R2, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15 |
| 6 | 2N7000 | PCM_Package_TO_SOT_THT_AKL:TO-92_Inline_Wide_SGD | Q1, Q4, Q5, Q6, Q7, Q8 |
| 5 | C_1206 100nF | PCM_Capacitor_SMD_AKL:C_1206_3216Metric | C5, C6, C7, C8, C11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 4 | PINHD_1x1_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7, J8, J9, J10 |
| 2 | PINHD_1x12_Male | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2 |
| 2 | R_1210 5.1KOhm | PCM_Resistor_SMD_AKL:R_1210_3225Metric | R4, R5 |
| 1 | Battery Holder + | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J5 |
| 1 | Battery Holder - | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | COM-09032 | COM-09032:XDCR_COM-09032 | U1 |
| 1 | C_Polarized 10uF/10V+ | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C1 |
| 1 | C_Polarized 10uF/16V+ | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C2 |
| 1 | C_Polarized 22uF/10V+ | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C4 |
| 1 | C_Polarized 22uF/6.3V+ | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C3 |
| 1 | MCP1700T-3002E-MAY | PCM_Package_DFN_QFN_AKL:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U5 |
| 1 | MPU6500 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U1 |
| 1 | R_1210 330Ohm | PCM_Resistor_SMD_AKL:R_1210_3225Metric | R16 |
| 1 | SS34 | PCM_Diode_SMD_AKL:D_SMC | D1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |

xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.

xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.

LimesOrLemons/Macropaduno
An ESP32-S3 handheld controller with a custom PCB and 3D-printed enclosure for numerous programmable functions.

cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



It measures 30 × 100 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the MT3608, COM-09032, SS34 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the xxdamlaxx/DroidVR repository on GitHub, at the commit this page was made from: the board is DroidVR_PCB/DroidVR_PCB.kicad_pcb and its schematic DroidVR_PCB/ArduinoProMicro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask xxdamlaxx before reusing the design.