Skip to the content
2 layers60 × 60 mmXNavi, the printed circuit board in 3D

複合航法基板

Size
60 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
92
Pads
256
Tracks, vias
220, 63
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Oct 2024
Updated
5 Sep 2026

Overview

XNavi is an open-source printed circuit board by xsuz, from the xsuz/Device-XNavi repository on GitHub. It is a 2-layer board of 60 × 60 mm with 34 parts on 92 nets, routed with 220 tracks and 63 vias.

It is built around the MAX3485ED and MAX-M10S. Its parts include 9 resistors, 7 connectors, 6 capacitors, 5 ICs and 4 diodes. It belongs with the radio and wireless boards and the RP2040, RP2350 and STM32 boards of this library.

Main components

2

Parts

34
QtyValueFootprintReferences
60.1uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C6
4200Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6, R7, R8
4LEDDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D2, D3, D4
2100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2120Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R9
2Conn_01x04Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_HorizontalJ3, J7
2Conn_01x06Connector_JST:JST_ZH_B6B-ZR_1x06_P1.50mm_VerticalJ2, J4
110Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
127nInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1
1ASM330LHHTRPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU3
1Conn_01x02Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ5
1Conn_CoaxialConnector_Coaxial:U.FL_Molex_MCRF_73412-0110_VerticalJ6
1LOGOAIOLIA:AIOLIAG***
1MAX-M10SRF_GPS:ublox_MAXU4
1MAX3485Package_SO:SOP-8_3.76x4.96mm_P1.27mmU5
1Micro_SD_Card_DetConnector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5J1
1RaspberryPi_PicoModule:RaspberryPi_Pico_SMD_HandSolderA1
1STM32G441KBTxPackage_QFP:LQFP-32_7x7mm_P0.8mmU1
1~Package_TO_SOT_SMD:SOT-23-8_HandsolderingU2

Similar boards

  • 2 layers56 × 56 mmPps watch, the printed circuit board in 3D

    Pps watch

    idlehandsdev/pps-watch

    An extremely accurate watch that doesn't tell time.

    39 parts42AGPL-3.0
  • 4 layers42 × 83.9 mmStratoSoar MK2.2, the printed circuit board in 3D

    StratoSoar MK2.2

    crnicholson/StratoSoar-MK2

    StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.

    116 parts24
  • 4 layers79.8 × 47.2 mmGpsfreak, the printed circuit board in 3D

    Gpsfreak

    rcls/gpsfreak

    GPS disciplined frequency generator

    157 parts12
  • 4 layers64 × 60 mmDronemagnav, the printed circuit board in 3D

    Dronemagnav

    ajisrawi/dronemagnav

    Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.

    60 parts11
  • 10 layers160 × 100 mmCirradio devboard, the printed circuit board in 3D

    Cirradio devboard

    mangobanaani/cirradio

    Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto

    316 parts8MIT
  • 2 layers225 × 63.5 mmGnss-7-seg clock, the printed circuit board in 3D

    Gnss-7-seg clock

    Tosainu/gnss-7-seg-clock

    GNSS-powered, seven-segment table clock

    90 parts6MIT
  • 4 layers47 × 45 mmBITSv5, the printed circuit board in 3D

    BITSv5

    UMDBPP/command_module

    Documentation and Design work for the command module payload

    104 parts4
  • 4 layers50 × 100 mmStDevboard, the printed circuit board in 3D

    StDevboard

    teletype7/IRIS

    166 parts3MIT

Questions

How big is the XNavi PCB?

It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the XNavi use?

34 parts, built around the MAX3485ED and MAX-M10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the XNavi KiCad files?

From the xsuz/Device-XNavi repository on GitHub, at the commit this page was made from: the board is circuit/XNavi/XNavi.kicad_pcb and its schematic circuit/XNavi/XNavi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the XNavi design in my own project?

Its repository states no licence, so its author keeps all rights: ask xsuz before reusing the design.