
XJ H01
adnksharp/aks-arduino-module-sensors-shield
Shield para modulos de sensores de Arduino a Cajas de contacto

Reflow Hot Plate is an open-source printed circuit board by xrayer2000, from the xrayer2000/SMD-Reflow-Hot-Plate repository on GitHub. It is a 2-layer board with 19 parts on 39 nets.
It is built around the BT139-600E and MOC3063M. Its parts include 4 resistors, 2 ICs, 2 diodes, 1 capacitor and 1 transistor. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, ON2 |
| 1 | 100k | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | TH1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | BT139-600 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | MOC3063M | Package_DIP:DIP-6_W7.62mm_Socket | U2 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | SSD1306 Display 1, Addesss 0x78, (GND,VCC,SCL,SDA) | SSD1306:ssd1306_1.3'' | Brd3 |
| 1 | SSD1306 Display 2, address 0x7A (GND,VCC,SCL,SDA) | SSD1306:ssd1306_1.3'' | Brd4 |

adnksharp/aks-arduino-module-sensors-shield
Shield para modulos de sensores de Arduino a Cajas de contacto



kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.

dmsd-lab/AMP8611
AMP8611 - open hardware integrated stereo power amplifier with a 2-channel input selector, PGA2311 digital volume control and LM3886 power stages


marsairforce/plug_controller
A dual solid state relay for switching mains AC power
19 parts, built around the BT139-600E and MOC3063M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the xrayer2000/SMD-Reflow-Hot-Plate repository on GitHub, at the commit this page was made from: the board is Kicad/Reflow Hot Plate/Reflow Hot Plate.kicad_pcb and its schematic Kicad/Reflow Hot Plate/Reflow Hot Plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask xrayer2000 before reusing the design.